| 09:00 a.m. |
MPA |
Welcome |
| |
|
Session "Hydrogen - Requirements and Solutions" |
| 09:05 a.m. |
MPA |
Introduction |
| 09:10 a.m. |
P. Auerkari, Kiwa Inspecta, Vantaa/Tampere, R. Rintamaa, Clenercon Oy, Espoo, S. Tuurna, Kiwa Inspecta, Vantaa/Tampere, Finland |
Hydrogen for Energy Challenges: Solutions and Gaps |
| 09:35 a.m. |
S. Zickler, TÜV Süd Industrie Service, Filderstadt, Germany |
Hydrogen Testing Systems - Requirements from the Health and Safety Standards’ Perspective |
| 10:00 a.m. |
G. Golisch, G. Genchev, E. Wanzenberg, S. Höhler, J. Mentz, Salzgitter Mannesmann Forschung GmbH, Salzgitter, Germany |
Hydrogen and Steel: Requirements, Materials Properties and Testing Technology |
| 10:25 a.m. |
|
Break |
| |
|
Session "Materials and Parameter Determination" |
| 10:40 a.m. |
MPA |
Introduction |
| 10:45 a.m. |
P. Fayek, K. Bauer-Troßmann, R. Westerheide, Robert Bosch GmbH, Renningen, Germany |
MatHyP - Materials Under Hydrogen Pressure |
| 11:10 a.m |
C. D. Schmidt, H.-J. Christ, A. von Hehl, Institut für Werkstofftechnik, University of Siegen, Germany |
Fatigue Properties of Microstructural Gradients in
Ti-6Al-4V Generated with Thermohydrogen Treatment |
| 11:35 a.m. |
R. Fauser, Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart, B. Kagay, J. Quatier, MPA University of Stuttgart, Germany |
Fatigue Behavior of Austenitic and Martensitic Stainless Steels in Hydrogen Environments |
| 12:00 p.m. |
|
Break |
| 13:00 p.m. |
O. Sobol, F. Konert, J. Nietzke, F. Wieder, D. Meinel, T. Böllinghaus, Bundesanstalt für Materialprüfung und -forschung (BAM), Berlin, Germany |
Urgent Material Issues on the Path to the Utilization of Existing Gas Infrastructure for Hydrogen Transport |
| 13:25 p.m. |
C. Cao, ZwickRoell GmbH & Co. KG, Ulm, Germany |
Materials Testing in the Hydrogen Industry |
| 13:50 p.m. |
K. M. Schweitzer, Bruker AXS GmbH, Karlsruhe J. Jürgensen, Institute for Materials, Ruhr Universität Bochum, R. Strack, C. Zühlke, Bruker AXS GmbH, Karlsruhe, Germany |
Hydrogen Embrittlement and the Analysis of Diffusible Hydrogen via Thermal Desorption Analysis |
| 14:15 p.m. |
|
Break |
| |
|
Session "Integrity under Hydrogen" |
| 14:30 p.m. |
MPA |
Introduction |
| 14:35 p.m. |
S. Faust, I. Fleck, U. Jendrich, Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbH, Köln, Germany |
A Review of the Potential Influence of Hydrogen on the Integrity of Components in Light Water Reactors (LWR) |
| 15:00 p.m. |
C. Günther, U. Marewski, M. Steiner, Open Grid Europe, Essen, H. Silcher, MPA University of Stuttgart, Germany |
Conversion of High Pressure Natural Gas Pipelines to Hydrogen |
| 15:25 p.m. |
K. Heckmann, B. Geyer, Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbh, Köln, Germany |
Case Study of Hydrogen-assisted Fatigue Crack Growth in Hydrogen Operated Gas Pipelines with the PROST Tool |
| 15:50 p.m. |
A. G. Varias, Innovation Hub, Public Power Corporation S.A., Pallini, Greece |
On the Integrity of Structures under Hydrogen Chemical Equilibrium and Steady-State Heat Conduction |
| 16:15 p.m. |
|
Break |
| |
|
Session "Specific Applications" |
| 16:30 p.m. |
MPA |
Introduction |
| 16:35 p.m. |
C. Metzmacher, Carl Zeiss SMT GmbH, Oberkochen, Germany |
Hydrogen Compatibility of Materials Used in EUV Lithgraphy |
| 17:00 p.m. |
M. Rhode, J. Nietzke, O. Sobol, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany |
Additive Manufacturing of Components in Hydrogen Technologies |
| 17:25 p.m. |
MPA |
Closing Words |
