Publikationen

Die Publikationen der MPA Universität Stuttgart

Aktuelle Veröffentlichungen

Pimienta, P.; McNamee, R.; Robert, F. u.a.; Bosnjak, J.; u.a.; Lakhani, H.; u.a.: Recommendation of RILEM TC 256-SPF on fire spalling assessment during standardised fire resistance tests: complementary guidance and requirements. In: Materials and Structures 57 (2024), No. 1. https://doi.org/10.1617/s11527-023-02248-z 

Stucki, S.; Kelch, S.; Mamie, T.; Burckhardt, U.; Grönquist, P.; Elsener, R.; Schubert, M.; Frangi, A.; Burgert, I.: High-performance timber-concrete-composites with polymer concrete and beech wood. In: Construction and Building Materials 411 (2024), No. 134069, https://doi.org/10.1016/j.conbuildmat.2023.134069

Aicher, S.; Münzer, A.; Hezel, J.; Weber, S.: Head pull-through capacity of load-bearing timber screws - influential parameters and shortcomings of European test procedure. In: Wood Materials Science & Engineering  (2023), 18 (2023), No. 4, pp. 1505-1520, https://doi.org/10.1080/17480272.2022.2155994 

Aicher, S.; Simon, K.: Semi-integral full-scale Stuttgart timber model. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 3264-3271, https://doi.org/10.52202/069179-0425 

Bender, T.; Klenk, A.; Weihe, S.: Creep-fatigue assessment of martensitic welds based on numerically determined local deformation. In: Materials Testing 65 (2023), Nr. 6, S. 815-823, https://doi.org/10.1515/mt-2022-0397

Bender, T.; Klenk, A.; Weihe, S.: Damage assessment of similar martensitic welds under creep, fatigue, and creep-fatigue loading. In: ASME Journal of Pressure Vessel Technology 145 (2023), No. 041502,  https://doi.org/10.1115/1.4062396

Benzarti, K.; Chataigner, S.; Wahbeh, M.; Boundouki, R.; Martin, E.; Sopena, L.; Zalbide, M.; Garcia-Sanchez, D.; Birtel, V.; Lehmann, F.; Gemignani, G.: Preventive fatigue strengthening of steel structures with bonded CFRP - efficiency demonstration on a real bridge. In: Benmokrane, B.; Mohamed, K.; Farghaly, A.; Mohamed, H. (Eds.): 8th International Conference on Advanced Composite Materials in Bridges and Structures. Cham : Springer, 2023. (Lecture Notes in Civil Engineering ; 278), pp. 459-467

Bokor, B.; Sharma, A.; Hofmann, J.: Nonlinear spring modelling approach for concrete edge breakout failure of shear loaded anchorages of arbitrary configurations. In: Engineering Structures 279 (2023), No. 115608,  https://doi.org/10.1016/j.engstruct.2023.115608 

Cao, A.S.; Grönquist, P.; Frangi, A.: Catenary action in strip-reinforced wood and timber beams. In: Construction and Building Materials 385 (2023), No. 131422, https://doi.org/10.1016/j.conbuildmat.2023.131422 

Cattaneo, S.; Mahadik, V.; Genesio, G.; Hofmann, J.: Influence of edge proximity on concrete breakout failure in post-installed RC columns foundation joints. In: Materials and Structures 56 (2023), No. 7, ID 119, https://doi.org/10.1617/s11527-023-02208-7 

Das, A.; Bosnjak, J.; Sharma, A.: Post-fire bond behaviour if reinforcement in concrete considering different bonded lengths and position of rebars. In: Engineering Structures 296 (2023), No. 116908, https://doi.org/10.1016/j.engstruct.2023.116908 

Frank, L.; Weihe, S.: Component tests and numerical investigations to determine the lifetime  and failure behavior of end stage blades. In: Journal of Engineering for gas turbines and power 145 (2023), No. 011013, https://doi.org/10.1115/1.4055834 

Füchslin, M.; Grönquist, P.; Stucki, S.; Mamie, T.; Kelch, S.; Burgert, I.; Frangi, A.: Push-out tests of wet-process adhesive-bonded beech timber-concrete and timber-polymer-concrete composite connections. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 3241-3247, http://dx.doi.org/10.52202/069179-0422

Grönquist, P.; Müller, K.; Mönch, S.; Frangi, A.: Design of adhesively bonded timber-concrete composites: bondline properties. In: 10th International Network on Timber Engineering Research (INTER) Meeting 2023, Biel; Proceedings, paper 56-7-5, http://dx.doi.org/10.18419/opus-13569

Grönquist, P.; Töpler, J.; Tapia, C.: Polar representation of material elasticity applied to wood and engineered wood products. In: 20th International Conference on Experimental Mechanics, 2023, Porto, http://dx.doi.org/10.18419/opus-13286

Grüter, C.; Gordon, M.; Muster, M.; Kastner, F.; Grönquist, P.; Frangi, A.; Langenberg, S.; De Wolf, C.: Design for and from dissassembly with timber elements: strategies based on two case studies from Switzerland. In: Frontiers in Built Environment 9 (2023), https://doi.org/10.3389/fbuil.2023.1307632

Haspel, L.; Ebentheuer Barceló, J.; Krenn, B.; Oevermann, P.; Fettke, M.; Schneider, L.; Weidner, P.; Ruff, D.C.; Ummenhofer, T.; Birtel, V.; Castridis, S.; Lotze, D.; Abrishambaf, A.; Hückler, A.; Schlaich, M.: Carbonzugglieder unter statischer und nicht ruhender Beanspruchung - Erste Ergebnisse aus dem Forschungsverbundvorhaben NeZuCa. In: Stahlbau 92 (2023), No. 7, S. 437-452, https://doi.org/10.1002/stab.202300032

Haynack, A.; Zadran, S.; Timothy, J.J.; Gambarelli, S.; Kränkel, T.; Thiel, C.; Ozbolt, J.; Gehlen, C.: Can a hand-held 3D scanner capture temperature-induced strain of mortar samples? Comparison between experimental measurements and numerical simulations. In: Mathematics 11 (2023), No. 17, ID 3672, https://doi.org/10.3390/math11173672

Juengert, A.; Friedrich, M.; Klenk, A.: Long term coupling of sensors in high temperatures environment. In: EWGAE35 & ICAE10 Conference on Acoustic Emission Testing, Ljubljana, Slovenia, September 2022. e-Journal of Nondestructive Testing, 28 (2023), No. 1, ID 27597, https://doi.org/10.58286/27597 

Kaess, M.; Werz, M.; Weihe, S.: Residual stress formation mechanisms in laser powder bed fusion - a numerical evaluation. In: Materials 16 (2023), No. 6, ID. 2321, https://doi.org/10.18419/OPUS-12970 

Kanzler, D.; Rentala, V.; Heckel, T.; Keßler, S.; Dethof, F.; Jüngert, A.; Vrana, J.: NormPOD - a generalized POD approach: from ferritic welding to reinforced concrete structures. In: Proceedings of SPIE 12491 (2023), No. 1249102

Kettler, K.; Klenk, A.; Weihe, S.: Experimental investigations on a model of a power plant flange under steady state and transient load. In: Materials at High Temperatures (2023), online first, https://doi.org/10.1080/09603409.2023.2278833 

Lakhani, H.; Hofmann, J.: Concrete cone failure of post-installed fasteners during fire. In: ce-papers 6 (2023), No. 1, pp. 373-380, https://doi.org/10.1002/cepa.1920 

Lehmann, F.; Hille, F.: Dauerüberwachung von Ingenieurbauwerken: das neue Merkblatt B 09 der DGZfP. In: Beton- und Stahlbetonbau 118 (2023), No. 4, S. 275-280, https://doi.org/10.1002/best.202200122 

Maci, N.; Hofmann, J.: Influence on the load-displacement behaviour of steel-to-concrete connections woth post-installed adhesive anchors. In: ce-papers 6 (2023), No. 1, pp. 471-481, https://doi.org/10.1002/cepa.1929 

Mahadik, V.; Sharma, A.; Hofmann, J.: Cast-in and post-installed rebar anchorage systems in RC column foundation joints: system specific assessment and design. In: Engineering Structures 276 (2023), No. 115356, https://doi.org/10.1016/j.engstruct.2022.115356  

Markert, M.; Garrecht, H.: Einfluss von RC-Gesteinskörnung auf das Druckkriechen eines hochfesten Betons. In: CE Papers 6 (2023), Nr. 6, S. 984-990, https://doi.org/10.1002/cepa.2868 

Megahed, S.; Krämer, K. M.; Heinze, C.; Kontermann, C.; Udoh, A.; Weihe, S.; Oechsner, M.: Creep of IN738LC manufactured with laser powder bed fusion: effect of build orientation and twinning. In: Materials at High Temperatures, Online first., https://doi.org/10.1080/09603409.2023.2261665 

Megahed, S.; Krämer, K.; Heinze, C.; Konterman, C.; Udoh, A.; Weihe, S.; Oechsner, M.: Development and Evaluation of Generic Test Pieces for Creep Property Assessment of Laser Powder Bed Fusion Components. In: ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, Boston, Massachusetts, USA, 26.06.2023 - 30.06.2023, Volume 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy: Boston: American Society of Mechanical Engineers ASME, 2023, https://doi.org/10.1115/GT2023-102193 

Megahed, S.; Krämer, K.M.; Heinze, C.; Kontermann, C.; Udoh, A.; Weihe, S.; Oechsner, M.: Influence of build orientation on the creep behavior of IN738LC manufactured with laser powder bed fusion. In: Materials Science and Engineering A 878 (2023), No. 145197, https://doi.org/10.1016/j.msea.2023.145197

Megahed, S.; Krämer, K.M.; Kontermann, C.; Heinze, C.; Udoh, A.; Weihe, S.; Oechsner, M.: Micro-twinning in IN738LC manufactured with laser powder bed fusion. In: Materials 16 (2023), No. 17, 5918, https://doi.org/10.3390/ma16175918

Onufrijevs, P.; Grase, L.; Padgurskas, J.; Rukanskis, M.; Durena, R.; Willer, D.; Iesalnieks, M.; Lungevics, J.; Kaupuzs, J.; Rukuiza, R.; Kriukiene, R.; Hanesch, Y.; Speicher, M.: Anisotropy of the tribulogical performance of periodically oxidated laser-induced periodic surface structures. In: Coatings 13 (2023), No. 7, https://doi.org/10.3390/coatings13071199 

Ormarsson, S.; Kuai, L.; Mahjoub, M.A.; Aicher, S..: Numerical and experimental study of glulam beams jointed with slotted-in steel plate connection. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 1261-1268

Osorio, D.; Gotti, A.; Kauffmann, F.; Klenk, A.; Weihe, S.: Creep, fatigue and creep-fatigue behaviour of martensitic/bainitic steels and nickel-based alloys and their welded joints at the temperature range 500°C-750°C. In: Materials at High Temperatures, online first, https://doi.org/10.1080/09603409.2023.2261780 

Osorio, D.; Klenk, A.; Weihe, S.: Component test of nickel-basaewd alloys and their welded joints under long-term creep loading. In: International Journal of Pressure Vessels and Piping 206 (2023), No. 105049, https://doi.org/10.1016/j.ijpvp.2023.105049 

Ozbolt, J.: Modeling deterioration of RC structures due to environmental conditions. In: Rossi, P.; Tailhan, J.-L.: Numerical modeling strategies for sustainable concrete structures. Cham : Springer Publishing International, 2023. (RILEM Bookseries ; 38), pp. 278-288

Pestka, J.; Weihe, S.: Influence of the Joining Force on the Nugget Diameter During Resistance Spot Welding of Aluminum Materials. In: Kiefl, N.; Wulle, F.; Ackermann, C. et al. (Hrsg.): Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains. ARENA2036, S. 96–107. Cham: Springer International Publishing, 2023., https://doi.org/10.1007/978-3-031-27933-1_10 

Petrasch, M.; Hofmann: Strengthening of anchor channels on the concrete surface. In: ce-papers 6 (2023), No. 1, pp. 494-505, https://doi.org/10.1002/cepa.1931

Pimienta, P.; McNamee, R.; Hager, I.; u.a.; Bosnjak, J.; u.a.; Lakhani; u.a.: Recommendations of RILEM TC 256-SPF on the method of testing concrte spalling due to fire: material screening test. In: Materials and Structures 56 (2023), No. 9, ID 164

Ressel, W.; Engel, C.; Ferraro, P.; Alber, S.; Garrecht, H.; Mielich, O.; et.al.: Wirtschaftlichkeitsuntersuchung an Bauweisen mit Betondecke der Belastungsklasse Bk100. Bremen: Fachverlag NW in Carl Ed. Schünemann Verlag. (Berichte der Bundesanstalt für Straßenwesen : S, Straßenbau ; 190). ISBN 978-3-95606-745-7

Riedlsperger, F.; Wojcik, T.; Buzolin, R.; Zuderstorfer, G.; Speicher, M.; Sommitsch, C.; Sonderegger, B.: Microstructural insights into creep of Ni-based alloy 617 at 700°C provided by electron microscopy and modelling. In: Materials Characterization 198 (2023), No. 112720, https://doi.org/10.1016/j.matchar.2023.112720

Sakiyama, F.I.H.; Verissimo, G.S.; Lehmann, F.; Garrecht, H.: Quantifying the extent of local damage of a 60-year-old prestressed concrete bridge: a hybrid SHM approach. In: Structural Health Monitoring 22 (2023), No. 1. pp. 496-517, https://doi.org/10.1177/14759217221079295 

Sakiyama, N.R.M.; Carlo, J.C.; Frick, J.; Garrecht, H.: CFD-based wind pressure coefficients on building facades with Butterfly/OpenFOAM for airflow network models. In: IBPSA Brasil, VII Congresso Latino Americano de Simulacao de Edificios, IBPSA Latam 2023, Florianopolis, Brasil, 9 e 10 de marco de 2023

Schopf, T.; Weihe, S.; Daniel, T.; Smaga, M.; Beck, T.: Fatigue behavior and lifetime assessment of an austenitic stainless steel in the VHCF regime at ambient and elevated temperatures. In: Fatigue and Fracture of Engineering Mechanics (2023), online first, https://doi.org/10.1111/ffe.13958 

Shishova, E.; Panzer, F.; Werz, M.; Eberhard, P.: Reversible inter-particle bonding in SPH for improved simulation of friction stir welding. In: Computational Particle Mechanics 10 (2023), pp. 555-564, https://doi.org/10.1007/s40571-022-00510-9 

Simon, K.; Aicher, S.: Rigid glulam joints to concrete abutments with glued-in steel rods. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 1443-1452

Smaga, M.; Sorich, A.; Daniel, T.; Beck, T.; Kohler, C.; Soppa, E.; Speicher, M.: Nano-twinning and uncommon α-martensite formation as a result of very high cycle fatigue of metastable austenitic stainless steel at 537 K. In: Scripta Materialia 231 (2023), No. 115457, https://doi.org/10.1016/j.scriptamat.2023.115457 

Tapia, C.; Aicher, S.: A new concept for column-to-column connections for multi-storey timber buildings - numerical and experimental investigations. In: Engineering Structures 295 (20236), No. 116770, https://doi.org/10.1016/j.engstruct.2023.116770 

Tapia, C.; Amtsberg, F.; Münzer, F.; Aicher, S.; Menges, A.: Rotational stiffness of newly developed LVL-based column-head reinforment for point-supported slab-column building systems. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 688-697, https://doi.org/10.52202/069179-0094 

Tapia, C.; Wagner, H.W.; Treml, S.; Menges, A.; Aicher, S.: Point-support reinforcement for a highly efficient timber hollow core slab system. In: Nyrud, A.Q.; Malo, K.A.; Nore, K. (Eds.): World Conference on Timber Engineering, Oslo 2023: timber for a livable future. Red Hook, NY.: Curran Associates Inc., 2023, pp. 2978-2986, https://doi.org/10.52202/069179-0388 

Töpler, J.; Schweigler, M.; Lemaître, R.; Palma, P.; Schenk, M.; Grönquist, P.; Tapia, C.; Hochreiner, G.; Kuhlmann, U.: Finite element based design of timber structures. 10th International Network on Timber Engineering Research (INTER) Meeting 2023, Biel; Proceedings, paper 56-102-1,  http://dx.doi.org/10.18419/opus-13594

Walz, D.; Göbel, R.; Werz, M.; Weihe, S.: Effect of weld length on strength, fatigue behaviour and microstructure of intersecting stitch-friction stir welded AA 6016-T4 sheets. In: Materials 16 (2023), No. 2, ID 513, https://doi.org/10.3390/ma16020533 

Zadran, S.; Ozbolt, J.; Gambarelli, S.: Numerical analysis of the freezing behavior of saturated cementitious materials with different amounts of chloride. In: Materials 16 (2023), No. 19, ID 6594, https://doi.org/10.3390/ma16196594 

Basaldella, M.; Jentsch, M.; Oneschkow, N.; Markert, M.; Lohaus, L.: Compressive fatigue investigation on high-strength and ultra-high-strength concrete within the SPP 2020. In: Materials 15 (2022), Nr. 11, 3793

Becker, R.; Scheller, E.; Küenzlen, J.H.R.; Stegmaier, M.; Kuhn, T.: Tragfähigkeit von Dübel-Systemen mit ETA zur Verankerung in Mauerwerk in Abhängigkeit von dessen Druckfestigkeit. In: Konstruktiver Ingenieurbau (2022), No. 2, S. 11-21

Bender, T.; Klenk, A.; Weihe, S.: Creep-fatigue assessment of martensitic welds based on numerically determined load deformation. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-84298

Böhm, C; Werz, M.; Weihe, S.: Practical Approach to Eliminate Solidification Cracks by Supplementing AlMg4.5Mn0.7 with AlSi10Mg Powder in Laser Powder Bed Fusion. In: Materials 15 (2022), Nr. 2, 572

Bokor, B.; Sharma, A.; Hofmann, J.: Nonlinear spring modelling approach for the evaluation of tension loaded anchorages in cracked concrete. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 170-181

Deutscher, M.; Markert, M.; Scheerer, S.: Influence of temperature on the compressive strength of high performance and ultra-high performance concretes. In: Structural Concrete 23 (2022), Nr. 4, pp. 2381-2390

Duan, X.; Homiack, M.; Tregoning, R.; Alzbutas, R.; Dedhia, D.; Dillström, P.; Dubyk, Y.; Heckmann, K.; Kim, Y.-B.; Kurth, R.; Li, Y.; Mao, G.; Nagai, M.; Oinonen, A.; Sallaberry, C.; Sjim, D.J.; Stefanini, L.; Stumpfrock, L.: Overview of international probabilistic fracture mechanics code models and capabilities for piping applications. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Durmaz, Ali Riza; Natkowski, E.; Arnaudov, N.; Sonnweber-Ribic, P.; Weihe, S.; Münstermann, S.; Eberl, C.; Gumbsch, P.: Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models. In: International Journal of Fatigue 160 (2022), July, No. 106824

Dwenger, F.; Kohler, C.; Kerkhof, K.: Modelling of the load-displacement behavior of undercut anchors and comparison with large-scale tests. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Fröhlich, T.; Hofmann, J.; Ziwes, M.; Kuhlmann, U.: Ermüdungsverhalten von Kopfbolzen in Beton- und Verbundkonstruktionen. In: Beton- und Stahlbeton 117 (2022), S. 37-46

Fröhlich, T.; Lotze, D.: Experimental investigation on the fatigue design of anchor channels In: Structural Concrete 23 (2022), No. 5, pp. 2867-2877

Fröhlich, T.; Lotze, D.; Hofmann, J.: Effect of static load level on the fatigue resistance of post-installed anchors in case of steel failure.  In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 652-663

Gambarelli, S.; Bošnjak, J.: Durability of wood - integration of experimental and numerical approach. In: Research Outreach (2022), June

Heckmann, K.; Sievers, J.; Silber, F.; Weihe, S.: Discussion of phenomena and computational modeling for flow through steam generator tube leaks. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Heckmann, K.; Silber, F.E.; Bass, R.; Dillström, P.; Duan, X.; Kang, S.Y.; Kim, Y.-B.; Kim, Y.; Krhounek, V.; Mao, G.; Niffenegger, M.; Samohyl, P.; Sievers, J.; Singh, P.K.; Tregoning, R.; Wallace, J.; Williams, P.: International leak rate benchmark: phase one results of the OECD/NEA/CSNI activity. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions

Heckmann, K.; Silber, F.; Sievers, J.; Stumpfrock, L.; Weihe, S.: A metastable jet model for leaks in steam generator tubes. In: Nuclear Engineering and Design 389 (2022), No. 111673

Heinemann, C.; Kontermann, C.; Schwienheer, M.; Müller, F.; Speicher, M.; Oechsner, M.:  Extrapolation methods: development, application and validation of novel methods: advanced testing concepts. In: Materials at high temperatures 39 (2022), online first

Hofmann, J.; Mahadik, V.; Sharma, A.: Assessment framework in background of TR069. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 506-515

Hofmann, J.; Weihe, S.; Kerkhof, K.; Dwenger, F.; Ries, M.; Henkel, F.O.: Assessment of piping integrity with post-installed anchor fastenings during seismic loading. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Jüngert, A.; Jacobs, O.; Stumpfrock, L.; Weihe, S.: Reliability considerations for ultrasonic testing at crack fields in large forgings. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Jüngert, A.; Werz, M.; Maev, R.G.; Brauns, M.; Labud, P.: Nondestructive testing of welds. In: Meyendorf, N.; Ida, N.: Singh, R.; Vrana, J. (Eds.): Handbook of Nondestructive Evaluation 4.0. Cham : Springer, 2022, S. 819-858

Kagay, B.; Ronevich, J.; San Marchi, C.: Influence of high-pressure hydrogen gas and pre-charged hydrogen on fatigue crack initiation and fatigue life of 255 super duplex stainless. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-84797

Kubotsch, M.; Scheck, R.; Willer, D.; Speicher, M.; Soppa, E.A.: Impact of surface preparation on the formation of deformation-induced α-Martensit in einem metastabilen austenitischen Stahl. Praktische Metallographie 59 (2022), Nr. 2, S. 75-91

Lakhani, H.; Hofmann, J.: 3D FE simulation of bonded anchors under tensile load during fire. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 839-850

Lakhani, H.; Hofmann, J.; Aggarwal, J.: Evaluation of pull-out capacity of post-installed rebars during fire: sensitivity to thermal properties. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 815-826

Leibing, B.; Locquenghien, F. von; Rückle, D.; Schellenberg, G.: Corrosion fatigue investigations on cast, forged and welded nickel-martensitic steels for hydro turbines. In: IOP Conference Series Earth and Environmental Science 1079 (2022), No. 012092

Mahadik, V.; Hofmann, J.; Genesio, G.; Sharma, A.: Concrete breakout failures in rebar end anchorages. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 146-157

Mally, L.; Werz, M.; Weihe, S.: Feasability study on additive manufacturing of ferritic steels to meet mechanical properties of safety relevant forged parts. In: Materials 15 (2022), Nr. 1

Markert, M.; Birtel, V.; Garrecht, H.: Influence of the concrete moisture content on the strain development due to cyclic loading. In: Zingoni, A. (Ed.): Current perspectives and new directions in mechanics, modelling and design of structural systems: proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation SEMC 2022, Cape Town, 5.-7th September 2022. London : CRC Press, 2022, pp. 1352-1356

Markert, M.; Deutscher, M.: Influence of concrete compressive strength on fatigue behaviour under cyclic compressive loading. In: Zingoni, A. (Ed.): Current perspectives and new directions in mechanics, modelling and design of structural systems: proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation SEMC 2022, Cape Town, 5.-7th September 2022. London : CRC Press, 2022, pp. 1339-1344

Markert, M.; Gebuhr, G.: Influence of concrete moisture on the pull-out resistance of steel fibres. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 907-917

Markert, M.; Katzmann, J.; Birtel, V.; Garrecht, H.; Steeb, H.: Investigation of the influence of moisture content on fatigue behaviour of HPC by using DMA and XRCT. In: Materials 15 (2022), Nr. 1

Mayer, U.: Insights on how to use the master curve method at elevated loading rates. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Mertens, L.; Grüner, F.: Entwicklung und Untersuchung optimierter Restauriermörtel für Kaiserstühler Tuff. In: Patitz, G.; Schinken, K. (Hrsg.): Natursteinsanierung 2022. Neue Natursteinrestaurierungsergebnisse, messtechnische Erfassungen und Sanierungsbeispiele. Tagung am 11./12. März in Karlsruhe/Breisach am Rhein, S. 139-152

Mutz, A.; Kerkhof, K.; Hofmann, J.: Structural Integrity of small-diameter piping during seismic loading. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Ozbolt, J.; Gambarelli, S.; Zadran, S.: Coupled hygro-mechanical meso-scale analysis of long-tem creep and shrinkage of concrete cylinder. In: Engineering Structures 262 (2022), No. 114332

Rudolph, J.; Herbst, M.; Grimm, M.; Roth, A.; Willuweit, A.; Swacek, C.; Schopf, T.; Weihe, S.: Consideration of important effects in environmentally assisted fatigue (EAF) of austenitic and ferritic steel components including welds and development of a practical fatigue assessment concept. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Sakiyama, F.I.H.; Lehmann, F.; Garrecht, H.: Development of a high sensor-count SHM of a prestressed concrete bridge using fibe optic sensors. In: Sena-Cruz, J.; Correia, L.; Azenha, M (Eds.): Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020). Cham : Springer, 2022. (RILEM Bookseries ; 34), Volume 3, pp 183-195

Sakiyama, F.I.H.; Verissimo, G.S.; Lehmann, F.; Garrecht, H.: Quantifying the extent of local damage of a 60-year old prestressed concrete bridge: a hybrid SHM approach. In: Structural Health Monitoring (2022), online first

Schneider, Y.; Weber, U.; Xu, C.; Zielke, R.; Schmauder, S.; Tillmann, W.: Experimental and numerical investigations of micro-meso damage evolution for a WC/Co-type tool material. In: Materialia 21 (2022), No. 101343

Schopf, T.; Weihe, S.; Rudolph, J.: Investigations on multi-stage tests and transient endurance limit behavior under low-, high- and very high cycle fatigue loads. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-84718

Schopf, T.; Weihe, S.; Rudolph, J.: Recent developments of advanced calculation concepts for the fatigue assessment of power plant components. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-85543

Silber, F.E.; Stumpfrock, L.; Klenk, A.; Weihe, S.: Computational determination of stress concentration factors for spherical and cylindrical shells with nozzles. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Silber, F.E.; Weihe, S.; Heckmann, K.; Sievers, J.: Specimen testing for steam generator tube leaks with measurement of flow patterns. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Sippel, T.; Hofmann, J.: Behavior of column shoe systems - experimental and accompanying finite element investigations. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 118-132

Sippel, T.; Hofmann, J.: The beam end test as a test specimen for the bond of reinforcement bars in concrete. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 528-540

Sippel, T.; Hofmann, J.; Maçi, N.: Tragverhalten von Stützenschuhverbindungen; Teil 1: Experimentelle Untersuchungen. In: Konstruktiver Ingenieurbau (2022), Nr. 1, S. 29-38

Sippel, T.; Hofmann, J.; Maçi, N.: Tragverhalten von Stützenschuhverbindungen; Teil 2: Untersuchungen zum Verformungsverhalten mit FE-Rechnungen. In: Konstruktiver Ingenieurbau (2022), Nr. 2, S. 41-47

Smaga, M.; Daniel, T.; Regitz, E.; Beck, T.; Schopf, T.; Veile, G.; Weihe, S.; Rudolph, J.; Fischer, U.: Very high cycle fatigue (VHCF) behvior of austenitic stainless steels and their welds for reactor internals at ambient and operating relevant temperature. In: 26th International Conference on Structural Mechanics in Reactor Technology 2022 : SMiRT 26, 10-15 July 2022, Berlin/Potsdam, Germany; Transactions 

Speicher, M.; Scheck, R.: "Metallography to go": mobile metallographic examinations directly on components. In: Practical Metallography 59 (2022), No. 8-9, pp. 532-544

Stumpfrock, L.; Weber, U.; Weihe, S.; Seidenfuss, M.; Mally, L.: Investigations on the failure behavior of specimens containing crack fields made by additive manufacturing. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-84666

Tapia, C.; Aicher, S.: Survival analysis of tensile strength variation and simulated length-size effect along oak boards. In: Journal of Engineering Mechanics 148 (2022), No. 1, ID 04021130

Tapia, C.; Claus, M.; Aicher, S.: A finger-joint based edge connection for the weak direction of CLT plates. In: Construction and Building Materials 340 (2022), 127645

Tlatlik, J.; Mayer, U.: Impact of elevated loading rates on the shape of the master curve (ASTM E1921) for a german RPV steel. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference, PVP2022, July 17-22, 2022, Las Vegas, Nevada, USA, PVP2022-83867

Vareda, J.P.; García-González, C.A.; Valente, A.J.M.; Simón-Vázquez, R.; Stipetic, M.; Duraes, L.: Insights on toxicity, safe handling and disposal of silica aerogels and amorphous nanoparticles. In: Environmental Sciences: Nano 8 (2021), No. 5, pp. 1177-1195

Vita, N.; Sharma, A.; Hofmann, J.: Bonded anchors with post-installed supplementary reinforcement under tension loading - experimental investigations. In: Engineering Structures 252 (2022), No. 113754

Vita, N.; Sharma, A.; Hofmann, J.: Strengthening of anchorages with post-installed reinforcement under shear loading. In: Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022, pp. 231-245

Wackenhut, G.; Lammert, R.; Silber, F.; Weihe, S.: CPS - an advanced tool for monitoring fatigue and fracture on pipes and other mechanical components. In: Proceedings of the ASME 2022 Pressure Vessels & Piping Conference PVP 2022, July 17-22, 2022, Las Vegas, Nevada, USA. New York : ASME, 2022, No. PVP2022-84753

Aicher, S.; Zisi, N.; Simon, K.: Screw-gluing of ribbed timber elements – effects of screw spacing and plate stiffness of bond line cramping pressure. In: Otto-Graf-Journal 20 (2021), S. 9-38

Al-Rousan, R.Z.; Sharma, A.: Integration of FRP sheet as internal reinforcement in reinforced concrete beam-column joints exposed to sulfate damaged. In: Structures 31 (2021), pp. 891-908

Bill, T.; Acosta, R.; Boller, C.; Donnerbauer, K.; Lücker, L.; Walther, F.; Heckmann, K.; Sievers, J.; Schopf, T.; Weihe, S.; Starke, P.: A short-time approach for fatigue life evaluation of AISI 347 steel for nuclear power energy applications. In: Applied Sciences 11 (2021), No. 11405

Böhm, C.; Hagenlocher, C.; Wagner, J.; Graf, T.; Weihe, S.: Analytical description of the criterion for the columnar-to-equiaxed transition during laser beam welding of aluminium alloys. In: Metallurgical and Materials Transactions A 52 (2021), online first

Bokor, B.; Sharma, A.; Hofmann, J.: Concrete edge failure of anchor groups placed parallel to an edge. In: ACI Structural Journal 118 (2021), No. 2, 237-248

Brück, S.; Blinn, B.; Diehl, K.; Wissing, Y.; Müller, J.; Schwarz, M.; Christ, H.-J.; Beck, T.; Staedler, T.; Jiang, X.; Butz, B.; Weihe, S.: Analysis of hydrogen-induced changes in the cyclic deformation behavior of AISI 300-Series austenitic stainless steels using cyclic indentation testing. In: Metals 11 (2021), No. 6, 923

Claus, M.; Tapia, C.; Aicher, S.: Bond line characteristics of new edge connections of cross-laminated timber in the weak direction based on milled profiled connection plates from laminated veneer lumber made of beech. In: Otto-Graf-Journal 20 (2021), S. 39-60

Evrim, C.; Chu, X.; Silber, F.; Isaev, A.; Weihe, S.; Laurien, E.: Flow features and thermal stress evaluation in turbulent mixing lows. In: International Journal of Heat and Mass Transfer 178 (2021), No. 121605

Fröhlich, T.; Hofmann, J.; Ziwes, M.; Kuhlmann, U.: Ermüdungsverhalten von Kopfbolzen in Beton- und Verbundkonstruktionen. In: Beton- und Stahlbeton 116 (2021), online first

Fröhlich, T.; Kempter, J.: Anchor channels under fatigue shear loading. In: Otto-Graf-Journal 20 (2021), S.75-88

Fröhlich, T.; Lotze, D. Testing and Evaluation of Anchor Channels under Fatigue Loading. CivilEng  2 (2021), No. 1, 1-13

Fuchs, W.; Hofmann, J.: Post-installed reinforcing bars - requirements for thier reliable use. In: Developments in the Built Environment 5 (2021), No. 100040

Gambarelli, S.; Ozbolt, J.: 3D hygro-mechanical meso-scale model for wood. In: Construction and Building Materials 311 (2021), No. 125283

Gambarelli, S.; Ozbolt, J.: Meso-scale modelling of CFRP-confined concrete: microplane-based approach In: Otto-Graf-Journal 20 (2021), S. 89-106

Garrecht, H.; Oexle, D.; Lackovic, L.; Teichmann, L.: Solar roof tiles – potentials for energy-efficient buildings in historic building stock In: Otto-Graf-Journal 20 (2021), S. 107-128

Gauder, P.; Seidenfuß, M.: Experimental and numerical investigations of tensile specimens containing multiple flaws in the ductile-to-brittle transition region. In: Engineering Fracture Mechanics 248 (2021), No. 107714

Ghirardello, M.; Manzoni, C.; Gironda, M.; Alberti, R.; Lenz, R.; Zöldföldi, J.; Behrendt, S.; Paz, B.; Valentini, G.; Comelli, D.: A novel photoluminescence hyperspectral camera for the study of artworks. In: The European Physical Journal Plus 136 (2021), No. 1052

Jüngert, A.; Jacobs, O.: Bewertung der Ungenauigkeiten bei der Fehlergrößenbestimmung mit Ultraschall an Rissfeldern in großen Schmiedeteilen. In: Erhard, Anton (Hrsg.): Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. -DGZfP-, Berlin: DGZfP-Jahrestagung 2021 - Zerstörungsfreie Materialprüfung. Berlin: DGZfP, 2021 (DGZfP-Berichtsbände BB 176)

Jüngert, A.; Jacobs, O.; Gauder, P.; Weihe, S.: Reliability of ultrasonic testing at crack fields in large forgings. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 62795

Juengert, A.; Werz, M.; Maev, R.G.; Brauns, M.; Labud, P. (2021) Nondestructive Testing of Welds. In: Meyendorf N., Ida N., Singh R., Vrana J. (eds) Handbook of Nondestructive Evaluation 4.0, Springer, Cham. https://doi.org/10.1007/978-3-030-48200-8_2-1

Kanzler, D.; Bertovic, M.; Dethof, F.; Heckel, T.; Jüngert, A.; Keßler, S.; Rentala, V.K.; Rosenthal, M.; Stolz, R.; Vrana, J.: Die deutschen Bestrebungen zur Normierung der Fähigkeits- und Zuverlässigkeitsbewertung der zerstörungsfreien Prüfung. In: Erhard, Anton (Hrsg.): Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. -DGZfP-, Berlin: DGZfP-Jahrestagung 2021 - Zerstörungsfreie Materialprüfung. Berlin: DGZfP, 2021 (DGZfP-Berichtsbände BB 176)

Lakhani, H.; Hofmann, J.: Concrete cone failure of headed stud under different fire exposure. In: Otto-Graf-Journal 20 (2021), S.135-146

Lakhani, H.; Hofmann, J.; Bal, A.: FE analysis of fasteners exposed to fire: evaluation of concrete cone capacity. In: Pečenko, R.; Huč, S.; Chifliganec, C.; Hozjan, T.: Applications of Structural Fire Engineering, Proceedings; 7th Applications of Structural Fire Engineering (ASFE'21), 10-11 Jun 2021, Ljubljana, Slovenia. University of Ljubljana

Laumann, S.; Lehmann, F.; Hofmann, J.: An approach for ultrasound-based ultimate load prediction of fasteners in concrete. In: Otto-Graf-Journal 20 (2021), S. 147-160

Lazik, P.-R.; Garrecht, H.: Wood ashes from electrostatic filter as a replacement for the fly ashes in concrete. In: Journal of Construction Materials 2 (2021), pp. 2-6

Lehmann, F.; Schreiner, M. Laumann, S.: The new DGZfP guideline monitoring of civil engineering structures. In: Otto-Graf-Journal 20 (2021), S. 161-166

Leibing, B.; Von Locquenghien, F.; Rückle, D.; Schellenberg, G.: Investigations on fatige curves in dependency of water quality for nickel-martensitic steels. In: IOP Conference Series: Earth and Environmental Science 774 (2021), No. 169690

Mahadik, V.; Sharma, A.; Hofmann, J.: Cast-in and post-installed rebar anchorage systems in RC column foundation joints: experimental investigations. In: Engineering Structures 238 (2021), No. 112208

Mammadov, G.; Gänz, P.; Hankele, M.; Werz, M.; Weihe, S.; Simon, S.: Investigation on the process influences on the pore size distribution of selective laser melted parts of AlSi10Mg. In: Conference Proceedings of the First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM21), Vienna, Austria

Markert, M.; Garrecht, H.: Influence of temperature in crease in fatigue behaviour of concrete during compressive fatigue loading. In: Gatuingt, F.; Torrenti, J.-M. (Eds.): Proceedings of the 2021 Session of the 13th fib International PhD Symposium in Civil Engineering. Lausanne: fib International Federation for Structural Concrete, 2021, pp. 266-274

Mayer, U.: Analyse der Verteilung von Bruch-Zähigkeitswerten bei Instabilität, ermittelt an CT25-Proben bei erhöhten Belastungsraten von 102 MPa√m s-1 bis 104 MPa√m s-1. In: Deutscher Verband für Materialforschung und -prüfung e.V. (Hrsg.): Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchunganalyse, Prüfmethoden und Anwendungen; 53. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18. und 19. Februar 2021. Berlin: Deutscher Verband für Materialforschung und -prüfung e.V., 2021, S. 53-62

Popp, T.: Various test methods for characterising the anchor pull-through resistance in mineral wool In: Otto-Graf-Journal 20 (2021), S. 167-180

Oßwald, A.; Werz, M.; Weihe, S.: A newly developed measuring principle for precise measurement of forces in test autoclaves. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 62072

Reinhardt, H.-W.; Mielich, O.; Özkan, H.: How can we explain cracks on the surface of ASR damaged concrete? In: Otto-Graf-Journal 20 (2021), S. 181-190

Sakiyama, F.I.H.; Lehmann, F.; Garrecht, H.: A novel runtime algorithm for thereal-time analysis and detecion of unexpected changes in a real-size SHM network with quasi-distributed FBG sensors. In: Sensors 21 (2021), No. 2871

Sakiyama, F.I.H.; Lehmann, F.; Garrecht, H.:Structural health monitoring of concrete structures using fibre-optic-based sensors: a review. In: Magazine of Concrete Research 73 (2021), No. 4, pp. 174-194

Sakiyama, N.R.M.; Carlo, J.C.; Mazzaferro, L.; Garrecht, H.: Building optimization through a parametric design platform: using sensivity analysis to improve a radial-based algorithm performance. In: Sustainability 13 (2021), No. 10,  5739

Sakiyama, N.R.M.; Frick, J.; Stipetic, M.; Oertel, T.; Garrecht, H.: Hygrothermal performance of a new aerogel-based insulating render through weathering: impact on building energy effiency. In: Building and Environment 202 (2021), September, No. 108004

Sakiyama, N.R.M.; Mazzaferro, L.; Carlo, J.C.; Bejat, T.; Garrecht, H.: Dataset of the EnergyPlus model used in the assessment of natural ventilation potential through buidling simulation. In: Data in Brief 34 (2021), No. 106753

Sakiyama, N.R.M.; Mazzaferro, L.; Carlo, J.C.; Bejat, T.; Garrecht, H.: Natural ventilation potential from weather analyses and building simulation. In: Energy and Buildings 231 (2021), No. 110596

Sakiyama, N.R.M.; Frick, J.; Bejat, T.; Garrecht, H.: Using CFD to evaluate natural ventilation through a 3D parametric modeling approach. In: Energies 14 (2021), No. 8

Scheck, R.; Speicher, M.; Willer, D.: Vibratory polishing - a preparation technique for demanding tasks in microstructural characterization. In: Practical Metallography 58 (2021), No. 4, pp. 193-203

Schmid, S.; Silber, F.E.; Heckmann, K.; Kulenovic, R.; Laurien, E.; Sievers, J.; Weihe, S.: Leak rate testing in the range of leak detection systems. In: Nuclear Engineering and Design 372 (2021), No. 111000

Schneider, Y.; Zielke, R.; Xu, C.; Tayyab, M.; Weber, U.; Schmauder, S.; Tillmann, W.: Experimental investigations of micro-meso damage evolution for a Co/WC-type tool material with application of digital image correlation and machine learning. In: Materials 14 (2021), No. 3562

Schopf, T.; Weihe, S.; Daniel, T.; Smaga, M.; Beck, T.; Rudolph, J.: Fatigue behaviour and lifetime assessment of the austenitic stainless steel AISI 347 and its associated filler metal ER 347 under low-, high-, and very high cycle fatigue loadings. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 62005

Sharma, A.; Bosnjak, J.; Tonidis, M.: Post-fire performance of RC beams with critical lap splices - experimental investigation and numerical validation. In: Journal of Building Engineering 34 (2021), No. 102045

Silber, F.; Stumpfrock, L.; Weihe, S.: Investigation on leak rates in thin-walled structures. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 61955

Skalecki, P.; Sesselmann, M.; Rechkemmer, S.; Britz, T.; Großmann, A.; Garrecht, H.; Sawodny, O.: Process evaluation for smart concrete road construction: road surface and thickness evaluation using high-speed LiDAR Technology. In: Automation 2 (2021), No. 1, pp. 31-47

Stimpfle, L.; Tapia, C.; Wenker, J.L.; Aicher, S.: Experimental and numerical investigations on glued joints for wide-span timber trusses. In: Otto-Graf-Journal 20 (2021), S. 211-234

Swacek, C.; Stumpfrock, L.; Weihe, S.: Investigations on the environmentally assisted fatigue behavior of steel specimens for a better understanding of component fatigue in nuclear applications. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 61961

Tapia, C.; Aicher, S.: Simulation of the localized modulus of aslasticity of hardwood boards by means of an autoregressive model. In: Journal of Materials in Civil Engineering 33 (2021), No. 6, No. 04021132

Tapia, C.; Stimpfle, L.; Aicher, S.: A new column-to-slab connection for multi-storey timber buildings. In: World Conference on Timber Engineering WCTE 20/21, Santiago, Chile, 9-12 August

Tian, K.; Ozbolt, J.; Hofmann, J.: Experimental investigation of concrete edge failure for single stud anchors and anchor groups after fire exposure. In: Construction and Building Materials 266 Part B (2021), No. 120982

Tonidis, M.; Bosnjak, J.; Sharma, A.: Post-fire performance of RC beams with critical lap splices - numerical parametric study. In. Journal of Building Engineering 44 (2021), No. 102637

Tonidis, M.; Sharma, A.: Numerical investigations on the influence of transverse beams and slab on the seismic behavior of substandard beam-column joints. In: Engineering Structures 247 (2021), No. 113123

Wagner, H.J.; Aicher, S.; Balangé, L.; Basalla, U.; Schwieger, V.; Menges, A.: Qualities of the unique: accuracy and process-control management in project-based robotic timber construction. In: In: World Conference on Timber Engineering WCTE 20/21, Santiago, Chile, 9-12 August

Walther, C.; Birtel, V.: Pull-out tests to demonstrate the influence of concrete humidity on the fatigue of bond In: Otto-Graf-Journal 20 (2021), S. 235-244

Walz, D.; Werz, M.; Weihe, S.: A new concept for producing high strength aluminium line-joints in car body assembly by a robot guided friction stir welding gun. In: Weißgraeber, P.; Heieck, F.; Ackermann, C. (Eds.): Advances in automotive engineering. theory and application; Stuttgart Conference on Automotive Production (SCAP2020). Berlin: Springer Vieweg, 2021. (Arena 2036), pp. 361-368

Weber, M.; Thoma, K.; Hofmann, J.: Finite element analysis of masonry under a plane stress state. In: Engineering Structures 226 (2021), No. 111214

Weihe, S.; Stumpfrock, L.; Weber, U.; Gauder, P.; Seidenfuss, M.: Temperature dependent failure behaviour of components containing crack fields: an experimental and numerical approach. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 61998

Williams, P.T.; Bass, B.R.; Dillström, P.; Gill, P.; Daniels, B.; Lammert, R.; Wackenhut, G.: Comparative assessments of different leakage-rate models for atlas+. In: Proceedings of the ASME 2021 Pressure Vessels and Piping Conference, PVP 2021,  July 13-5, 2021 (virtual conference), No: 62046

Zeberer, M.; Markert, M.: Development of waterproof lightweight mortar for slim structural elements – as a concrete canoe In: Otto-Graf-Journal 20 (2021), S. 245-260

Arnaudov, N.; Kolyshkin, A.; Weihe, S.: Micromechanical modeling of fatigue crack initiation in hydrogen atmosphere. In: Mechanics of materials 149 (2020), No. 103557

Baldermann, M.; Weigele, J.; Zöldföldi, J.: Hoppenlau-Friedhof Stuttgart – 1600 Grabsteine; Schadenserfassung, Konzeption und Planung der Konservierung. In: Patitz, G.; Schinken, K. (Hrsg.): Natursteinsanierung 2020: Neue Natursteinrestaurierungsergebnisse, messtechnische Erfassungen und Sanierungsbeispiele, Tagung am 13. / 14. März in Karlsruhe. Stuttgart: Fraunhofer IRB Verlag, 2020, S. 39-58

Baumert, C.; Garrecht, H.: About the influence of shear-induced particle migration and sedimentation on the measurement results of concrete rheometers. In: Mechtcherine, V.; Kamal K., Secrieru., E. (Eds.): Rheology and Processing of Construction Materials. Cham : Springer, 2020, pp. 168-173

Baumert, C.; Garrecht, H.: Minimization of the influence of shear-induced particle migration in determining the rheological characteristics of self-compacting mortars and concretes. In: Materials 13 (2020), No.1542

Bender, T.; Klenk, A.; Weihe, S.: Damage Assessment of Similar Martensitic Welds under Creep, Fatigue and Creep-Fatigue Loading. In: Proceedings of the ASME 2020 Pressure Vessels and Piping Conference, PVP 2020-21497, July 19-24, 2020 (virtual conference)

Bender, T.; Klenk, A.; Weihe, S.: Developments in Assessing Welds in High Temperature Conditions and Different Stress Triaxialities. In: Prakash, R.V.; Kumar, R.S.; Nagesha, A.; Sasikala, G.; Bhaduri, A.K. (Eds.): Structural Integrity Assessment, Proceedings of ICONS 2018. Singapore: Springer Nature Singapore, pp. 405-420

Böhm, C.; Werz, M.; Weihe, S.: Dilution Ratio and the Resulting Composition Profile in Dissimilar Laser Powder Bed Fusion of AlSi10Mg and Al99.8. In: Metals 2020, 10, 1222, doi:10.3390/met10091222

Bokor, B.; Sharma, A.; Hofmann, J.: Experimental investigations on the concrete edge failure of shear loaded anchor groups of rectangular and non-rectangular configurations. In: Engineering Structures 222 (2020), No. 11153

Bosnjak, J.; Gambarelli, S.; Sharma, A.; Meskovic, A.: Experimental and numerical studies on masonry after exposure to elevated temperatures. In: Construction and Building Materials 230 (2020) No.116926

Chellapandian, M.; Suriya Prakash, S.; Mahadik, V.; Sharma, A.: Microplane-based nonlinear finite element analysis of fiber-reinforced polymer-strengthened reinforced concrete columns. In: ACI Structural Journal 117 (2020), No. 1, pp. 255-268

Daniel, T.; Smaga, M.; Beck, T.; Schopf, T.; Stumpfrock, L.; Weihe, S.; Rudolph, J.: Investigation of the very high fatigue (VCH) behavior of austenitic stainless steels amd their welds for reactor internals at ambient temperature and 300° C. In: Proceedings of the Pressure Vessels and Piping Conference. Volume 1: Codes and Standards. Virtual, Online. August 3, 2020. Little Falls, NJ : ASME, 2020, PVP2020-21460, V001T01A112

Das, A.; Sharma, A.; Bosnjak, J.: Numerical investigations on the influence of concrete cover on bond behaviour of reinforcement in concrete after fire. In: Gatuingt, F.; Torrenti, J.-M. (Eds.): Proceedings of the 2020 Session of the 13th fib International PhD Symposium in Civil Engineering, held in Paris, France, August 26-28, 2020. Lausanne : FIB, 2020, pp. 279-286

Deutscher, M.; Markert, M.; Tran N.C.; Scheerer, S.: Influence of the compressive strength of concrete on the temperature increase due to cyclic loading. In: Zhao B., Lu X. (Eds.): Concrete Structures for Resilient Society; Proceedings of the fib Symposium 2020, Held Online, China, 22-24 November 2020, pp. 773-780

Eckstein, M.Y.; Panzehir, M.; Hofmann, J.: Testing of fasteners under static load with repeated crack opening. In: Otto-Graf-Journal 19 (2020), S. 9-20

Franzen, C.; Ettl, H.; Grassegger, G.; Grüner, F.; Lenz, R.; Siedel, H.; Wendler, E.: Desalination of porous building material by means of poultices, the new revised WTA-guideline. In: Siegesmund, S.; Middendorf, B. (Eds.): Monument Future : decay and conservation of stone : proceedings of the 14th International Congress on the Deterioration and Conservation of Stone. Halle : Mitteldeutscher Verlag, 2020, S. 483-488

Frick, J.; Lehmann, F.; Grüner, F.; Weirich, T.: Zerstörungsfreie und materialtechnologische Untersuchungen an der Jubiläumssäule. In: Blumer, R.-D.; Ronke, J. (Eds): "Schlicht und doch harmonisch und schön..." - die Stuttgarter Jubiläumssäule im Spannungsfeld von Landesgeschichte, Stadtgestalt und Restaurierung. Ostfildern : Thorbecke, 2020, S. 66-77

Frick, J.; Sakiyama, N.; Hejazi, B.; Lehmann, F.; Gambarelli, S.; Ozbolt, J.; Garrecht, H.: Real time monitoring and salt transport and related modelling. In: Siegesmund, S.; Middendorf, B. (Eds.): Monument Future : decay and conservation of stone : proceedings of the 14th International Congress on the Deterioration and Conservation of Stone. Halle : Mitteldeutscher Verlag, 2020, S. 431-436

Frick, J.; Sakiyama, N.R.M.; Stipetic, M.; Garrecht, H.: Large scale laboratory and field tests of aerogel renders. In: Serrat, C.; Casas, J.R.; Gibert, V. (Eds.): Current topics on durability of building materials and components: proceedings of the XV. edition of the International Conference on Durability of Building Materials and Components (DBMC 2020), Barcelona, Spain, 20 - 23 October 2020. Barelona : CIMNE, 2020, pp. 231-238

Frick, J.; Stipetic, M.; Mielich, O.; Garrecht, H.: Studies on thermal performance of advanced aerogel-based materials. In: Littlewood, J.; Howlett, R.J.; Capozzoli, A.; Jain, L.C. (Eds.): Sustainability in Energy and Buildings : Proceedings of SEB 2019. Singapore : Springer, 2020, pp. 641-649

Fröhlich, T.; Castridis, S.: Detection of fatigue damage in fasteners using ultrasound. In: Otto-Graf-Journal 19 (2020), S. 21-32

Froehlich, T.; Castridis, S.; Hofmann, J.: Ultrasonic tests on fastenings under fatigue loading. In: Zhao B., Lu X. (Eds.): Concrete Structures for Resilient Society; Proceedings of the fib Symposium 2020, Held Online, China, 22-24 November 2020, pp. 765-772

Fuchs, W.; Eligehausen, R.; Hofmann, J.: Bemessung der Verankerung von Befestigungen in Beton - EN 1992-4, der neue Eurocode 2, Teil 4. In: Beton- und Stahlbetonbau 115 (2020), Nr. 1, S. 36-44

Fuchs, W.; Hofmann, J.: Nachträgliche Bewehrungsanschlüsse, Vorschriften - Grundlagen für ihre sichere Verwendung? In: Beton- und Stahlbetonbau 115 (2020), No. 7, pp. 523-531

Gambarelli, S.; Ozbolt, J.: Dynamic fracture of concrete in compression: 3D finite element analysis at meso- and macro-scale. In: Otto-Graf-Journal 19 (2020), S. 33-48

Gambarelli, S.; Ozbolt, J.: Dynamic fracture of concrete in compression: 3D finite element analysis at meso- and macro-scale. In: Continuum Mechanics and Thermodynamics 32 (2020), online first

Gambarelli, S.; Ozbolt, J.: MESO-scale modeling of CFRP-confined concrete: microplane-based approach. In: Fibers 8 (2020), No. 6, 38

Garrecht, H.: Functionalized lightweight concretes with mineral and biogenic aggregates. In: BFT International 86 (2020), Nr. 2, pp. 39-40

Garrecht, H.: Hybrid roof and facade elements as low-exergy components in climate-neutral building and community concepts. In: BFT International 86 (2020), Nr. 2, pp. 27-28

Garrecht, H.: Potentials for digitizing the concrete production process. In: BFT International 86 (2020), Nr. 2, pp. 51-52

Garrecht, H.: Potentials for future infrastructural projects. In: BFT International 86 (2020), Nr. 2, pp. 101-102

Gecgel, A.S.; Baumert, C.; Garrecht, H.: Sensor-based method for testing the sedimentation stability of modern concretes at construction sites in research and development. In: CPI Concrete Plant International (2020), No. 6, pp. 14-19

Geiger, S.; Lakhani, H.; Hofmann, J.: Heat transfer analysis of bonded anchors in solid and perforated calcium silicate masonry stones. In: Otto-Graf-Journal 19 (2020), S. 49-60

Grüner, F.; Zöldföldi. J.: Natural stone exchange and quality assurance in the case of the Ulm Minster in Baden-Württemberg. In: Siegesmund, S.; Middendorf, B. (Eds.): Monument Future : decay and conservation of stone : proceedings of the 14th International Congress on the Deterioration and Conservation of Stone. Halle : Mitteldeutscher Verlag, 2020, S. 919-924

Haist, M.; ...; Baumert, C.; ...Garrecht, H., u.a.: Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. In: Materials and Structures (2020), pp. 53-92

Hejazi, B.; Frick, J.; Garrecht, H.: Deterioration factors of delicate materials. In: Otto-Graf-Journal 19 (2020), S. 71-90

Hejazi, B.; Sakiyama, N.R.M.; Frick, J.; Garrecht, H.: Re-introduction of traditional Persian materials for energy-efficient constructions. In: IOP Conference Series Earth and Environmental Sciences 588 (2020), No. 042025

Hörning, M.; Schertel, A.; Schneider, R.; Lemloh, M.-L.; Schweikert, M.R.; Weiss, I.M.: Mineralized scale patterns on the cell periphery of the chrysophyte Mallomonas determined by comparative 3D cryo-FIB SEM data processing. In: Journal of Structural Biology 209 (2020), 1

Hofmann, J.: Sicherheit im Bauwesen - von der Brücke bis zum Befestigungssystem. In: Bauingenieur 95 (2020), Nr. 12, A 17-22

Hofmann, J.; Dwenger, F.; Sharma, A.; Kerkhof, K.: Verschiebungsverhalten von Hinterschnittdübeln unter Zuglast bei Rissöffnen und -schließen - Vergleich von Einzeldübelversuchen und großmaßstäblichen Erdbebenversuchen. In: Beton- und Stahlbetonbau 115 (2020), Nr. 1, S. 54-61

Jebara, K.; Ozbolt, J.; Sharma, A.: Pryout capacity of headed stud anchor groups with stiff base plate: 3D finite element analysis. In: Structural Concrete 21 (2020), No. 3, pp. 905-916

Kuntal, V.S.; Chellapandian, M.; Prakash, S.S.; Sharma, A.: Experimental study on the effectiveness of inorganic bonding materials for near-surface mounting shear strengthening of prestressed concrete beams. In: Fibers 8 (2020), No. 6, 40

Lakhani, H.; Aggarwal, J.; Hofmann, J.: Predicting the fire rating of cantilever slab-wall connection with post installed rebar. In: Lange, D.; u.a. (Eds.):Proceedings of the 11th International Conference on Structures in Fire, SiF 2020, The University of Queensland, Brisbane, Australia, 30th November - 2nd December 2020. Brisbane : University of Queensland, 2020, pp. 196-203

Lakhani, H.; Hofmann, J.; Grübel, A.: Fire resistance of simply supported reinforced concrete beams with tension lap splices. In: Otto-Graf-Journal 19 (2020), S. 91-102

Lazik, P.-R.; Bosnjak, J.; Cetin, E.; Kücük, A.: Application of wood ash as a substitute for fly ash and investigation of concrete properties. In: Otto-Graf-Journal 19 (2020), S. 103-118

Lazik, P.-R.; Garrecht, H.: Wood ashes from electrostatic filter as a replacement for the fly ashes in concrete. In: International Journal of Civil and Environmental Engineering 14 (2020), No. 9, pp. 292-295

Lazik, P.-R.; Garrecht, H.: Wood ashes from electrostatic filter as a replacement for the fly ashes in concrete. In: Gatuingt, F.; Torrenti, J.-M. (Eds.): Proceedings of the 2020 Session of the 13th fib International PhD Symposium in Civil Engineering, held in Paris, France, August 26-28, 2020. Lausanne : FIB, 2020, pp. 118-124

Lehmann, F.A.: Non-destructive testing and monitoring as elements of building inspection. In: Otto-Graf-Journal 19 (2020), S. 119-130

Mahadik, V.; Sharma, A.; Hofmann, J.: Beam-column connections formed with post-installed versus cast-in reinforcement: cyclic behavior. In: 17th World Conference on Earthquake Engineering, Sendai, Japan, September 13th to 18th 2020

Mahadik, V.; Sharma, A.; Hofmann, J.: Re-evaluation of existing tests on RC connections using post-installed reinforcing bars. In: Engineering Structures 209 (2020), No. 109970

Mahrenholtz, C.; Sharma, A.: Development length of deformed reinforcing bars - a worldwide review. In. ACI Materials Journal 117 (2020), NO. 5, pp. 125-134

Mahrenholtz, C.; Sharma, A.: Load capacity of shallow embedded anchor channels. In: CivilEng 1 (2020) No. 3, pp. 243-252

Mahrenholtz, C.; Sharma, A.: Qualification and design of anchor channels with channel bolts according to the new EN 1992-4 and ACI 318. In: Structural Concrete 21 (2020), pp. 94-106

Mahrenholtz, P.; Sharma, A.: Fire rating of post-installed anchors and rebars. In: CivilEng 1 (2020), Nr. 3., 216-228

Markert, M.; Brodscholl, R.: Katzmann, J.: Development of an ultrasonic testing method for continous measurements on concrete with different moisture levels under compressive fatigue loading. In: Otto-Graf-Journal 19 (2020), S. 131-146

Markert, M.; Laschewski, H.:  Influencing factors on the temperature development in cyclic compressive fatigue tests: an overview. In: Otto-Graf-Journal 19 (2020), S. 147-162

Mayer, U: Comparison between Loading Rate and Local Stress Rate When Applying ASTM E1921 at Elevated Loading Rates. In: Materials Performance and Characterization, Vol. 9, No. 5, pp. 579-592

Mielich, O.: Use of ASR damaged concrete pavements as recycled aggregates in road construction. In: Otto-Graf-Journal 19 (2020), S. 163-174

Nürnberger, U.; Köse, E.C.: Durability of galvanised fasteners in timber construction. In. Materials and Corrosion 71 (2020), Nr. 5, pp. 834-848

Öttl, C.: Partial reconstruction of the runway at Stuttgart airport – quality management during removal and concrete placement. In: Otto-Graf-Journal 19 (2020), S. 195-208

Oßwald, A.; Werz, M.; Weihe, S.: Research on fatigue resistance of weld ends. In: Materials Testing 62 (2020), No. 5, pp. 465-470

Panzehir, M.; Hofmann, J.: Influence of the support of adhesive anchors systems with and without sleeve in solid calcium silicate bricks. In: Otto-Graf-Journal 19 (2020), S. 221-230

Panzer, F.; Shishova, E.; Werz, M.; Weihe, S.; Eberhard, P.; Schmauder, S.: A physically based material model for the simulation of friction stir welding. In: Materials Testing 62 (2020), No. 6, pp. 603-611

Popp, T.: Study on the moisture migration within a hygroscopic thermal insulating material from wood fibre during the measurementof thermal conductivity. In: Otto-Graf-Journal 19 (2020), S. 231-240

Reinhardt, H.W.; Mielich, O.: On the effect of superabsorbent polymers on compressive creep of concrete. In: Otto-Graf-Journal 19 (2020), S. 241-248

Rudolph, J.; Bergholz, S.; Metzger, K.; Silber, F.; Klenk, A.; Müller, T.: Advanced component fatigue monitoring approaches using the example of a boile recirculation pump. In: Proceedings of the Pressure Vessels and Piping Conference. Volume 1: Codes and Standards. Virtual, Online. August 3, 2020. Little Falls, NJ : ASME, 2020, PVP2020-21053, V001T01A034

Rusia, A.; Weihe, S.: Development of an end-to-end simulation process chain for prediction of self-piercing riveting joint geometry and strength. In: Journal of Manufacturing Processes 57 (2020), pp. 519-532

Sakiyama, N.R.M.; Carlo, J.; Frick, J.; Garrecht, H.: Perspectives of naturally ventilated buildings: a review. In: Renewable and Sustainable Energy Reviews 130 (2020), No. 109933

Sakiyama, N.; Frick, J.; Garrecht, H.: HMT modelling of exterior walls submitted to harsh test condition. In: Otto-Graf-Journal 19 (2020), S. 249-266

Schäfer, I.; Mlikota, M.; Schmauder, S.; Weber, U.: Modelling the damping response of biomimetic foams based on pomelo fruit. In: Computational Materials Science 183 (2020), No. 109801

Schmeer, D.; Schönemann, B.; Arkhipkina, O.; Haase, W.; Garrecht, H.; Sawodny, O.; Sobek, W.: Entwicklung einer ökologischen und ökonomischen Bauweise durch den Einsatz vorgefertigter multifunktionaler Wandbauteile aus gradiertem Beton. Abschlussbericht. Stuttgart : Fraunhofer IRB, 2020. (Forschungsinitiative Zukunft Bau ; F 3194)

Schmieder, P.; Hofmann, J.: Wetting and adhesion of liquids on surfaces. In: Otto-Graf-Journal 19 (2020), S. 267-274

Schneider, Y.; Weber, U.; Wasserbäch, W.; Zielke, R.; Schmauder, S.; Tillmann, W.: A numerical method for the generation of hierarchical Poisson Voronoi microstructures applied in micromechanical finite element simulations; Part 1: Method. In: Computational Mechanics 66 (2020), pp. 651-667

Sharma, A.; Bosnjak, J.; Chittapuram Praveen Kumar, A.: Bond between steel and steel fiber reinforced concrete after exposure to elevated temperatures. In: Otto-Graf-Journal 19 (2020), S. 283-296

Skalecki, P.; Idrizi, S.; Schreiner, M.; Lehmann, F.; Sawodny, O.: Hydration modeling for improved curing process prediction in concrete construction. In: 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, USA (virtual conference), July 6-9, 2020. [Piscataway, NJ] : IEEE, 2020, pp. 1202-1207

Stehle, E.J.; Sharma, A.: A new displacement-based approach for pulsating tension load tests of post-installed anchors for the use in structural applications under seismic actions. In: Engineering Structures 211 (2020), No. 110431

Tapia, C.; Aicher, S.: Variation and serial correlation of modulus of elasticity between and within European oak boards (Quercus robur and Q. petraea). In: Holzforschung  74 (2020), No. 1, pp. 33-46

Tapia, C.; Stimpfle, L.; Aicher, S.: A new column-to-slab connection for multi-storey timber buildings. In: Otto-Graf-Journal 19 (2020), S. 297-318

Tonidis, M.; Sharma, A.; Bosnjak, J.: Influence of the aspect ratio on the shear strength of 3D beam column. In: Otto-Graf-Journal 19 (2020), S. 319-334

Tonidis, M.; Sharma, A.; Bosnjak, J.: Numerical modeling of 3D Beam-column joints. In: 17th World Conference on Earthquake Engineering, Sendai, Japan, September 13th to 18th 2020

Toth, M.; Bokor, B.; Sharma, A.: Numerical study on closely spaced anchor groups of identical configurations under centric trension loading. In: Engineering Structures 224 (2020), No. 111245

Weiß, A; Zapara, M.; Offermanns, S.: Hochgeschwindigkeitsscherschneiden von Stangenmaterial. In: massivUMFORMUNG März 2020, S. 68-73

Werz, M.; Weihe, S.: Hochfeste und tiefziehbare Aluminium-Stahl-Hybridplatinen für den Karosserieleichtbau. In: ATZproduktion 7 (2020), Nr. 1, S. 10-15

Zöldföldi, J.; Holzkamp, L.; Lenz, R.; Krautheimer, R.; Grüner, F.: Onsite tests to assess wet vacuum cleaning technology for salt reduction on sandstones. In: Siegesmund, S.; Middendorf, B. (Eds.): Monument Future : decay and conservation of stone : proceedings of the 14th International Congress on the Deterioration and Conservation of Stone. Halle : Mitteldeutscher Verlag, 2020, S. 937-942

Abe, Y.; Nakamura, A.; Suzuki, S.; Tantrakarn, K; Nakai, I.; Zöldföldi, J.; Pfälzner, P.: Use of variscite as a gemstone in the Late Bronze Age Royal Tomb at Qatna, Syria. In: Journal of Archaeological Science: Reports (2019), No. 27, ID 101994

Acosta, R.; Boller, C.; Starke, P.; Jamrozy, M.; Knyazeva, M.; Walther, F.; Heckmann, K.; Sievers, J.; Schopf, T.; Weihe, S.: Non-destructive testing derived parameters for microstructure-based residual service life assessment of aging metallic materials in nuclear engineering. In: Materials Testing 61 (2019), Nr. 11, S. 1029-1038

Agnoletti, A.; Consiglio, A.; Muciaccia, G.; Bosnjak, J.; Sharma, A.: Effects of elevated temperatures and of loading procedures on the bond performance of reinfocement in concrete. In: 9th International Conference on Concrete under Severe Conditions - Enviornment & Loading, Porto Allegre, Brazil, 2019

Aicher; S.: Investigations, assessment and design of wooden pile buttress foundations of a wide spanning heritage stone arch bridge. In: Branco, J.M.; Poletti, E.; Sousa H.S. (Eds.): SHATiS'19: 5th International Conference on Structural Health Assessment of Timber Structures: proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATIS'2019, 25-27 September 2019, Guimarães, Portugal, Universidade do Minho

Aicher, S.; Zisi, N.; Sustersic, I.: Load sharing and damage redundancy of ribbed wooden elements. In: Otto-Graf-Journal, 18 (2019), pp.15-30

Arkhipkina, O.; Schuler, B.; Stipetic, M.: Impact of the pumping process on the properties of lightweight concrete. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019), DOI:10.1088/1757-899X/615/1/012015

Becker, R.; Hofmann, J.; Thiele, C.; Wendel, F.: Forschungsvorhaben zur Bewertung der Tragfähigkeit von Injektionsdübeln in Mauerwerk im Rahmen von Baustellenversuchen. In: Jäger, W. (Hrsg.) Mauerwerk-Kalender 2019, Berlin

Böhm, C.; Braun, M.; Werz, M.; Weihe, S.: Hybride SLM-Fertigung: Methoden zur Bestimmung des Vermischungsgrades im selektiven Laserstrahlschmelzen. In: Tagungsband zur 4. Tagung des Arbeitskreises Additiv gefertigte Bauteile und Strukturen, 06. und 07. November, Berlin

Bokor, B.; Pregartner, T.; Sharma, A.; Hofmann, J.: Bemessung von zugbeanspruchten Befestigungen in Beton mit einem nicht-linearen Federmodell-Hintergrund und Softwarelösung für die Versagensart Betonausbruch. In: Bauingenieur 94 (2019), Nr. 9, S. 326-335

Bokor, B.; Sharma, A.; Hofmann, J.: Experimental and numerical investigations on the concrete edge failure of anchor groups of arbitrary configurations. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Bokor, B.; Sharma, A.; Hofmann, J.: Experimental investigations on concrete cone failure of rectangular and non-rectangular anchor groups. In: Engineering Structures 188 (2019), pp. 202-217

Bokor, B.; Sharma, A.; Hofmann, J.: Spring modelling approach for evaluation and design of tension loaded anchor groups in case of concrete cone failure. In: Engineering Structures 197 (2019), ID 109414

Bokor, B.; Sharma, A.; Hofmann, J.: A new spring model for concrete cone failure of anchorages under tension. In: Otto-Graf-Journal, 18 (2019), pp. 31-40

Bošnjak, J.: Numerische Modellierung des Mauerwerks im Blauen Turm auf Grundlage von kleinformatigen Mauerwerksprüfkörpern. In: Materialprüfungsanstalt Stuttgart (Hrsg.): Die Instandsetzung des Blauen Turms in Bad Wimpfen. Aktuelle Forschung an Kulturdenkmalen. Tagungsband zum Kolloquium am 17. Mai 2019 in Bad Wimpfen, S. 57-64

Bošnjak, J.; Gambarelli, S.; Sharma, A.; Mešković, A.: Experimental and numerical studies on masonry after exposure to elevated temperatures. In: Otto-Graf-Journal, 18 (2019), pp. 41-52

Bošnjak, J.; Schellhorn, H.; Dilek. E.; Öttl, C.: Concerning the use of ground coal bottom ash as a partial substitute for cement. In: Otto-Graf-Journal, 18 (2019), pp. 53-64

Bosnjak, J.; Sharma, A.; Grauf, K.: Mechanical properties of concrete with steel and polypropylene fibres at elevated temperatures. In: Fibers 7 (2019), Nr. 2, doi.org/10.3390/fib7020009

Das, A.; Bosnjak, J.; Sharma, A.: Numerical investigations on post-fire bond behavior of reinforcement in concrete. In: Baricevic, A.; Jelcic Rukavina, M.; Damjanovic, D.; Guadagnini, M. (Eds.): International Conference on Sustainable Materials, Systems and Structures (SMSS 2019) - Durability, Monitoring and Repair of Structures, 20-22 March 2019, Rovinj, Croatia. Paris: RILEM Publ., 2019, pp. 445-453

Dobnikar, J.; Dill-Langer, G.; Aicher, S.: Hybrid GLT-LVL glulam-modelling and experiments. In: International Conference on Computational Methods in Wood Mechanics – from Materials Properties to Timber Structures (CompWood 2019), June 17-19, 2019, Vaxjö, Sweden

Eckardt, C.; Friedrich, M.; Wamser, T., Wolff, N.; Metzger, K.: Faserverstärkte Keramik-Armierungen für den Rohrleitungsbau - Gut gerüstet gegen Druck und Hitze. In: Chemie Technik; April 2019, pp. 38-40

Egermann, R.; Griesemann, H.; Twelmeier, H.; Garrecht, H.: Begnadigung nach Abrissurteil: Rathausturm in Wilhelmshaven durch statisch-konstruktive Untersuchungen gerettet, Teil 1. In: B +B Bauen im Bestand (2019), Nr. 3, S. 14-18

Friedrich, M.; Huang, M.; Jüngert, A.; Klenk, A.; Weihe, S.; Metzger, K.: CMC-Jacketed Piping for High-Temperature Applications: Concept, Laboratory Tests and Large-Scale Application Test In: Key Engineering Materials, Vol. 809, pp. 547-552

Fröhlich.T.; Birtel, V.; Lotze, D.: Zyklische Prüfung von Befestigungen im Beton mittels Schwingungsanregung. Alternative Prüfmethode für quasi-statische, seismische und ermüdungsrelevante Einwirkungen. In: Beton- und Stahlbetonbau 114 (2019), Nr. 8, S. 595-602

Fröhlich, T.; Birtel, V.; Lotze, D.: Zyklische Prüfung von Befestigungen in Beton mittels Schwingungsanregung, In: Curbach, M., Opitz, H., Scheerer, S., Hampel, T. (Hrsg.): 10. Symposium - Experimentelle Untersuchungen von Baukonstruktionen. Dresden: Institut für Massivbau der TU Dresden. (Schriftenreihe Konstruktiver Ingenieurbau Dresden kid ; 48), S. 33–44

Fröhlich, T.; Lotze, D.: Fatigue behaviour of fastenings under combined static and dynamic loading. In: Derkowski, W., u.a. (Eds.): Concrete - Innovations in Materials, Design and Structures; Proceedings of the fib Symposium 2019, Krakow, Poland, 27-29 May 2019, pp. 1920-1927

Fröhlich, T.; Lotze, D.: Fatigue of fastenings - investigations on the effect of static load level. In: Otto Graf Journal 18 (2019), S. 79-88

Gambarelli, S.; Ozbolt, J.: Dynamic fracture of concrete in compression: 3D finite element analysis at meso- and macro-scale. In: Pijaudier-Cabot, G., Grassl, P., La Borderie, C. (Eds.): 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS X, 23-26 June, Bayonne, France

Gambarelli, S.; Ozbolt, J.: Interaction between damage and time-dependent deformation of mortar in concrete: 3D FE study at meso-scale. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Gambarelli, S.; Ožbolt, J.: Interaction between damage and time-dependent deformation of concrete: 3D FE parametric study at meso-scale. In: Otto-Graf-Journal, 18 (2019), pp. 101-112

Garnadt, F.; Kontermann, C.; Huang., M.; Klenk, A.: Quantifizierung von Stützwirkungseffekten für Bauteile aus Stahlguss vor dem Hintergrund flexiblerer Betriebsweisen. Zwischenbericht zum Vorhaben Nr. 1299 (AVIF-Nr. 310), FVV Herbsttagung Heft R590/591, 2019

Garrecht, H.; Arkhipkina, O.; Schuler, B.; Eichler, K.: Sprayable, structurally dense lightweight concrete In: Betonwerk + Fertigteiltechnik 85 (2019), No. 2, pp. 39-40

Garrecht, H.; Baumert, C.: Rheology-based mixing process to ensure uniform workability of demenading concrete mixes. In: Otto-Graf-Journal, 18 (2019), pp. 113-130

Garrecht, H.; Baumert, C.; Hampel, S.; Lisin, W.; Lazik, P.: Herausforderungen einer gleichförmigen Herstellung von Fahrbahnbetonen und Möglichkeiten einer rheologiegestützten Mischprozessführung. In: Beton- und Stahlbetonbau 114 (2019), Nr. 12, S. 888-898

Gecgel, A.; Baumert, C.; Garrecht, H.: New method for testing the sedimentation stability of modern concretes at construction sites. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Grosse, C. U.; Jüngert, A.; Jatzlau, P.: Local Acoustic Resonance Spectroscopy. In: Ida, N.; Meyendorf, N. (Eds.): Handbook of Advanced Non-Destructive Evaluation. Cham

Grüner, F.: Zustandserfassung am Mauerwerk des Blauen Turmes. Materialprüfungsanstalt Stuttgart (Hrsg.): Die Instandsetzung des Blauen Turms in Bad Wimpfen. Aktuelle Forschung an Kulturdenkmalen. Tagungsband zum Kolloquium am 17. Mai 2019 in Bad Wimpfen, S.93-104

Hankele, M; Mammadov, G.; Gänz, P., Werz, M.; Weihe, S., Simon, S.: Untersuchung der Prozesseinflüsse beim selektiven Laserstrahlschmelzen auf die Porengrößenverteilung bei Bauteilen aus AlSi10Mg. In: Tagungsband zur 4. Tagung des Arbeitskreises Additiv gefertigte Bauteile und Strukturen, 06. und 07. November, Berlin

Hankele, M.; Werz, M.; Weihe, S.: Quantitative Untersuchungen der statischen und zyklischen Festigkeitseigenschaften von additiv gefertigten Proben aus AlSi10Mg. In: Richard, H.A., Schramm, B., Zipsner, T. (Eds.): Additive Fertigung von Bauteilen und Strukturen: Neue Erkenntnisse und Praxisbeispiele. Wiesbaden: Springer Fachmedien, 2019, S. 127-144

Heinemann, C.; Schwienheer, M.; Kontermann, C.; Speicher, M.; Bender, T.; Klenk, A.: Fortschrittliche Methoden zur gesicherten Bestimmung und Auswertung von Zeitdehn- und Zeitstandbruchkennwerten. Abschlussbericht zum AVIF-Forschungsvorhaben A 297

Hejazi, B.; Sakiyama, N.; Frick, J.; Garrecht, H.: Hygrothermal Simulations Comparative Study: Assessment of Different Materials Using WUFI and DELPHIN Software. In: Proceedings of Building Simulation 2019: 16th Conference of IBPSA

Hennrich, C.C.; Luthardt, C.; Reeb, S.; Garrecht, H.; Diers, C.: Schloss Erxleben - Innovative Sanierungsmethoden für die denkmalgerechte, ressourcenschonende Sanierung denkmalbedeutender Kulturgüter als Bildungs- und Informationsprogramm. In: Bausubstanz 10 (2019), Nr. 1, S. 24-31

Hofmann, J.; Dambach, L.; Cenk Köse, E.: Corrosion of bonded anchors in concrete. In: Otto-Graf-Journal, 18 (2019), pp. 131-140

Hofmann, J.; Laumann, S.: Ultraschalluntersuchungen zur Identifikation von Schwerlastankern. In: CE-Papers 3 (2019), No. 2, Special Issue: Festschrift zum Jubiläum 25 Jahre Professur und 60. Geburtstag von o. Univ.-Prof. Konrad Bergmeister, pp. 200-204

Ibrahim, M.; Nocentini, K.; Stipetic, M.; Dantz, S.; Caiazzo, F. G.; Sayegh, H.; Bianco, L.: Multi-field and multi-scale characterization of novel super insulating panels/systems based on silica aerogels: thermal, hydric, mechanical, acoustic, and fire performance. Building and Environment 151 (2019), pp. 30-42

Jobski, D.; Kontermann, C.; Linn, S.; Speicher, M.: Lifetime and damage mechanism of thick-walled casing made of modern steel cast materials at variable operational mode, FVV Information Sessions Turbo Machinery, Issue R588, 2019

Jüngert, A.: Herstellung von Testkörpern mit realistischen Testfehlern für die Ultraschallprüfung mit Phased-Array-Verfahren. In: DGZfP Seminar des FA Ultraschallprüfung, Berlin, 4.-5.11.2019

Jüngert, A.; Maylandt, M.; Friedrich, M.; Huang, M.; Klenk, A.: Ein neues Rohrkonzept für Anwendungen in konventionellen Kraftwerken – Überwachung eines Langzeitversuchs im Kohlekraftwerk mit Schallemissionsmessungen. 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen, 27.-28. März 2019, Karlsruhe

Jüngert, A.; Wackenhut, G.; Lammert, R.; Spies, M.; Rieder, H.: Zuverlässigkeit und ZfP – Lebensdauerbewertung von Komponenten unter Einbeziehung von Ultraschallprüfungen. In: DACH Jahrestagung 2019, Friedrichshafen, 27.-29.5.2019

Käß, M.; Werz, M.; Weihe, S.: Numerische Simulation zur Vorhersage von Temperaturfeldern, Eigenspannungen und Verzug beim selektiven Laserstrahlschmelzen. In: Richard, H.A.; Schramm, B.; Zipsner, T. (Eds.): Additive Fertigung von Bauteilen und Strukturen: Neue Erkenntnisse und Praxisbeispiele. Wiesbaden: Springer Fachmedien, 2019, S. 199-221

Kerkhof, K.; Garrecht, H.; Weihe, S.: Large Scale Tests on the Coupled System Building – Post Installed Anchor – Piping at Earthquake Loading. Transactions SMiRT-25, August 4-9, 2019, Charlotte, North Carolina, USA, Division V

Klöck, W.: Lay-up factors for wood-based cross-ply laminates. In: Otto-Graf-Journal, 18 (2019), pp.153-170

Krüger, M.; Lehmann, F.: Instrumentiertes Feuchtemonitoring von historischen Bauwerken mittels elektrischer Impedanzspektroskopie. Bautechnik 96 (2019), Nr. 9, S. 696-701

Kuczynska, M.; Maniar, Y.; Schafet, N.; Becker, U.; Weihe, S.: Numerical Prediction of Failure in SnAgCu Solder under Shear and Tensile-dominant Cyclic Loading. In: Proceedings of the 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Hannover, Germany, 23 – 27 March 2019

Kuster Maric, M.; Ozbolt, J.; Mandic Ivankovic, A.; Vlasic, A.; Bleiziffer, J.; Srbic, M.; Skokandic, D.; Bosnjak, J.; Lackovic, L.: Influence of concrete damage on reinforcement corrosion. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Lackovic, L.; Garrecht, H.: Experimental and numerical comparison of bio-based and conventional phase change materials for thermal storage applications. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Lakhani, H.; Hofmann, J.: Effect of loss in concrete cover during fire on the predicted temperature distribution. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Lakhani, H.; Hofmann, J.: Effect of loss of concrete cover on the fire resistance of Reinforced Concrete (RC) beams: numerical study using fiber beam-column element. In: Huang, S.S., Burgess, I. (Eds.): Proceedings of the 6th International Workshop on Concrete Spalling due to Fire Exposure, University of Sheffield, Sheffield, United Kingdom, 19-20 September 2019

Lehmann, F.; Chataigner, S.; Birtel, V.; Wang, J.; Konrad, O.: Development of a sensor for monitoring mechanically stressed adhesive joints. In: Construction and Building Materials 227 (2019), Nr. 116627

Lehmann, F.; Grüner,F.; Schreiner, M.; Hof, J.: Bauwerksüberwachung am Blauen Turm. Konzeptionierung, Instrumentierung und Betrieb eines Monitoringsystems zur Überwachung der strukturellen Integrität des Blauen Turms in Bad Wimpfen. In: Materialprüfungsanstalt Stuttgart (Hrsg.): Die Instandsetzung des Blauen Turms in Bad Wimpfen. Aktuelle Forschung an Kulturdenkmalen. Tagungsband zum Kolloquium am 17. Mai 2019 in Bad Wimpfen, S 65-73

Lehmann, F.; Sakiyama, F. I. H.; Fackler, R. M.: Fibre optic measurement systems for building monitoring. In: Otto-Graf-Journal, 18 (2019), pp. 183-196

Leibing, B.; Klenk, A.; Seidenfuss, M.: Component Testing and Numerical Calculation of a Bolted High Temperature Power Plant Pipe Flange Under Complex, Near-Service Loads. In: Journal of Pressure Vessel Technology, Volume 141, Issue 6

Mack, A.; Lackovic, L.; Lisin, W.; Blatt, C.; Garrecht, H.: Thermoelectric district supply concept including e-mobility. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Mahadik, V.; Hofmann, J.: Creep behaviour of tension loaded adhesive anchors in non-cracked low strength concrete. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Markert, M.; Birtel, V.; Garrecht, H.: Influence of concrete humidity on the temperature development under fatigue compressive loading. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Markert, M.; Birtel, V.; Garrecht, H.: Temperature and humidity induced damage processes in concrete due to pure compressive fatigue loading. In: Derkowski, W., u.a. (Eds.): Concrete - Innovations in Materials, Design and Structures; Proceedings of the fib Symposium 2019, held in Krakow, Poland, 27-29 May 2019, pp. 1928-1935

Mayer, U.: Comparison of Loading Rate and Local Stress Rate when Applying ASTM E1921 at Elevated Loading Rates. In 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics), May 15-17, Denver, CO, USA

Metzger, K; Bergholz, S.; Rudolph, J.; Silber, F.; Klenk, A.; Müller, T.: Advanced Component Fatigue Monitoring Appoaches using the Example of a Boiler Recirculazion Pump. In: Proceedings of the 45th MPA-Seminar, October 1-2, 2019, Stuttgart, pp. 134-147

Mielich, O.: Empfehlungen zur Schadensdiagnose AKR-geschädigter Betonfahrbahndecken unter Berücksichtigung der Bauweise. In: 1. Kolloquium „Straßenbau in der Praxis“, 29.-30. Januar 2019 in Ostfildern, Tagungshandbuch 2019, Technische Akademie Esslingen, S.423-430

Mielich, O.: Rissbildungen und mechanische Betoneigenschaften an einem Fahrbahndeckenbeton mit Alkali-Kieselsäure-Reaktion. In: Beton (2019), Nr. 11, S. 406-415

Mielich, O: Alkali-silica reaction (ASR) on German motorways: An overview. In: Otto-Graf-Journal, 18 (2019), pp. 197-208

Mielich, O.: Empfehlungen zur Schadensdiagnose AKR-geschädigter Betonfahrbahndecken unter Berücksichtigung der Bauweise. In: Straße und Autobahn 2019, H. 8, S. 666-672

Mielich, O.; Reinhardt, H.-W.; Özkan, H.: Kriechen und mechanische Eigenschaften von Straßenbetonen nach AKR-provozierender Lagerung. In: Beton-und Stahlbetonbau 114 (2019), Nr. 6, S. 419-429

Mielich, O; Zwerger, V.: Zustandserfassung von Betonfahrbahndecken mit Verdacht auf eine schädigende Alkali-Kieselsäure-Reaktion. In Beton- und Stahlbetonbau 114 (2019), Heft 12, S. 899-910

Möller, T. R.; Nitschke, A.; Niendorf, T.; Wegener, T.; Heine, B.; Balci, B.: A contribution to the assessment of the fatigue behavior of additively manufactured Invar (Ni 36). In: Proceedings of the 45th MPA-Seminar, October 1-2, 2019, Stuttgart, pp. 188-195

Müller, B.: Time-dependent deformation behaviour of SAP-modified concrete. In: Otto-Graf-Journal, 18 (2019), pp. 209-220

Müller, F.; Oechsner, M.; Kontermann, C.; Speicher, M.; Klenk, A.: Aktuelles zum Kriech- und Kriechrissverhalten der Legierung C-263, 42. Vortragsveranstaltung der Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe am 29. November 2019 in Düsseldorf, S. 63-74

Mueller, F.; Oechsner, M.; Speicher, M.; Klenk, A.: Creep and Creep Crack Behavior of Alloy C-263 Used for Thick-Walled Components - An Update, Proceedings of EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, October 21 – 24, 2019, Nagasaki, Japan, pp. 546-557

Offermanns, S.; Weihe, S.: Damage and Failure of Thin-Walled Piping under Detonative Loading. In: 13th International Conference on Mechanical Behaviour of Materials (ICM-13), 11-14 June 2019, Melbourne, Australia

Özkan, H.: Influence of specimen geometry and size on expansion due to alkali-silica reaction. In: Otto-Graf-Journal, 18 (2019), pp. 239-248

Panzer, F.; Schneider, M.; Werz, M.; Weihe, S.: Friction stir welded and deep drawn multi-material tailor welded blanks. In: Materials Testing 61 (2019), Nr. 7, S. 643-651, doi: 10.3139/120.111366

Popp, T.: Experimental study on shear behaviour of four different thermal insulating materials. In: Otto-Graf-Journal, 18 (2019), pp. 249-258

Ramadan, Z.; Garrecht, H.: Thermal flow simulation for an energy garden building block. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Reinhardt, H.-W.; Mielich, O.; Müller, B.: Zum Kriechen von Beton mit Superabsobierenden Polymeren unter Druckbeanspruchung. In: Beton- und Stahlbetonbau 114 (2019), Nr. 7, S. 448-453

Reinhardt, H.W.; Özkan, H.; Mielich, O.: Creep of concrete as influenced by the rate of expansion due to alkali-silica reaction. In: Structural Concrete 20 (2019), Nr. 5, pp. 1781-1791

Rex, J., Sharma; A., Hofmann, J.: A new test specimen to investigate the bond behavior of post-installed reinforcing bars. In: Structural Concrete 20 (2019), No. 2, pp. 583-596

Rohringer, W.; Sommerhuber, R.; Csaszar, L.; Panzer, N.; Wald, S.; Fischer, B.; Garrecht, H.; Grüner, F.; Frick, J.: Material characterization via contact-free detection of surface waves using an optical microphone. In: Ganjian, E.; Limbachiya, M.; Ghafoor, N.; Claisse, P.; Bagheri, M. (Eds.): 5th Int. Conf. on Sustainable Construction Materials and Technologies (SCMT5), 14-17 July 2019, Kingston University in Cooperation with Coventry University London, United Kingdom

Rudolph, J.; Herbst, M.; Roth, A.; Swacek, C.; Schopf, T.: Important effects in environmentally assisted fatigue (EAF) of austenitic and ferretic steel components including welds and their consideration in a fatigue assessment concept. In: Proceedings of the ASME 2019 Pressure Vessels and Piping Conference, San Antonio, Texas, USA, July 14-20 2019, Paper No:. PVP2019-93913, doi.org/10.1115/PVP2019-93913

Rudolph, J.; Herbst, M.; Roth, A., Willuweit, A., Swacek, C., Schopf, T.: Important Effects in Environmentally Assisted Fatigue (EAF) of Austenitic and Ferritic Steel Components Including Welds and their Consideration in a Fatigue Assessment Concept. In: Proceedings of the 45th MPA-Seminar, October 1-2, 2019, Stuttgart, pp. 227-237

Rusia, A.; Beck, M.; Weihe, S.: Simulation of Self-Piercing Riveting Process and Joint Failure with Focus on Material Damage and Failure Modelling. 12th European LS-DYNA Conference 2019, 14 – 16 May 2019, Koblenz

Sakiyama, N.R.M.; Hejazi, S.B.M.; Frick, J.; Lehmann, F.; Garrecht, H.: Humidity and Temperature Variation in Building Stones: Comparing Simulation Results and Impedance Measurements. In: Proceedings of Building Simulation 2019: 16th Conference of IBPSA, pp. 403-408

Sakiyama, N.R.M.; Hejazi, S.B.M.; Oliveira, C.C. de; Frick, J.; Garrecht, H.: Effect of traditional persian materials and parametric design of the thermal performance of a generic building in mediterranean climate. In: Central Europe towards Sustainable Building 2019 (CESB19), IOP Conf. Series, Earth and Environmental Science 290

Sakiyama, N.R.M.; Frick, J.; Garrecht, H.: Determination of U-values of render systems supposed to weathering. In: Otto-Graf-Journal, 18 (2019), pp. 273-284

Sauer, J.; Musialak, J.; Steeb, H.; Markert, M.; Birtel, V.; Garrecht, H.: Experimental characterization of effective mechanical properties of (micro-) fractured high performance concrete, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications. In: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Applications, pp. 1439-1443

Sharma, A.; Bosnjak, J.; Bessert, S.: Experimental investigations on residual and performance in concrete subjected to elevated temperature. In: Engineering Structures 187 (2019), pp. 384-395

Sippel, T.; Hofmann, J.: Der Beam-End-Test zur Überprüfung des Verbundverhaltens von Bewehrungsstahl in Beton. In: KI Konstruktiver Ingenieurbau 4 (2019), Nr. 6, S. 11-21

Speicher, M.; Bender, T.; Klenk, A.; Müller, F.; Kontermann, C.; Ewald, J.: Assessment of Power Plant Components with Flaws and Defects Operating in the Long-Term Creep Range. In: Journal of Engineering for Gas Turbines and Power, Volume 141, Issue 11, pp. 111013, DOI: 10.1115/1.4045020]

Speicher, M.; Jobski, D.; Kontermann, C.: Creep-Fatigue Interactions in 9CR Martensitic Cast Steel: Microstructure and Mechanical Behavior. In: Proceedings of EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, October 21 – 24, 2019, Nagasaki, Japan, pp. 273-281

Speicher, M.; Osorio, D.; Kohler, C.; Wöllmann, L.; Müller, F.; Kontermann, C.: Simulation of crack behavior of nickel cast alloys with large grain size at high temperature. In: FVV Information Sessions Turbo Machinery, Issue R588, 2019

Stahl, T.; Frick, J.: Application test on external plasters In: Wall-ACE Workshop – Advanced Aerogel Insulation materials for the Building Envelope – New Solutions, performance and market perspective, September 3th 2019, 16th IBPSA International Conference, 2-4 September 2019, Rome, Italy

Stegmaier, M.: Ermittlung eines gebäudespezifischen Bemessungswertes für die Mauerwerksdruckfestigkeit am Beispiel des Blauen Turmes in Bad Wimpfen. In: Materialprüfungsanstalt Stuttgart (Hrsg.): Die Instandsetzung des Blauen Turms in Bad Wimpfen. Aktuelle Forschung an Kulturdenkmalen. Tagungsband zum Kolloquium am 17. Mai 2019 in Bad Wimpfen, S. 47-56

Stegmaier, M.; Grüner, F.: Investigations on masonry of the Blue Tower in Bad Wimpfen. In: Otto-Graf-Journal, 18 (2019), pp. 301-312

Stipetic, M.: Challenges in development of next generation insulation products. In: Polymers in Building Insulation Conference, 9.4.-10.4.19, Düsseldorf

Stipetic, M.: Aerogel-based materials and their development particularities. In: Otto-Graf-Journal, 18 (2019), pp. 325-328

Stipetic, M.: Overview of the development of new insulation products. In: Edana Construction Working Group, Brussels, 2019

Stipetic, M.; Hein, H.: Mit mehr Luft effektiver dämmen - Aerogele als innovative Dämmung. In: Magazin Denkmalsanierung 2019 / 2020, S. 67-69

Stipetic, M.; Hein, H.: Certification, Life-Cycle Aspects and AMANAC cluster. Wall-Ace Workshop, Advanced Aerogel Insulation materials for the Building Envelope, Glasgow, 2019

Stipetic, M.; Hein, H.; Frick, J.: Certification, Life Cycle Aspects and AMANAC Cluster. In: Wall-ACE Workshop – Advanced Aerogel Insulation materials for the Building Envelope – New Solutions, performance and market perspective, September 3th 2019, 16th IBPSA International Conference, 2-4 September 2019, Rome, Italy

Stipetic, M.; Hofmann, J.: Tragverhalten und Tragfähigkeit von Injektionsdübeln in Lochsteinen unter Berücksichtigung der Steingeometrie. In: Jäger, W. (Hrsg.): Mauerwerk-Kalender 2019, Berlin

Swacek, C.; Gauder, P.; Seidenfuss, M.: Evaluation of the crack interaction and failure behavior of components with crack fields using a damage mechanical approach. In: Proceedings of the ASME 2019 Pressure Vessels and Piping Conference, Volume 1: Codes and Standards, San Antonio, Texas, USA, July 14-19, 2019, Paper No. PVP2019-93911, doi.org/10.1115/PVP2019-93911

Tapia, C.; Aicher, S.: Applying the XFEM method to the simulation of tensile failure in timber boards and finger-joints in a glulam strength model. In: COMPWOOD 2019 International Conference on Computational Methods in Wood Mechanics – from Material Properties to Timber Structures, June 17-19, 2019 Växjö, Sweden

Tapia, C.; Aicher, S.: Evaluation of design concepts for holes in glulam beams – comparison with test results. In: Otto-Graf-Journal, 18 (2019), pp. 329-344

Thiele, M.; Eckmann, S.; Huang, M.; Fischer, K.A.: Einfluss thermisch induzierter Spannungsgradienten auf die Ermüdungslebensdauer. Abschlussbericht zum FVV-Vorhaben Nr. 1218. FVV Herbsttagung Heft R591, 2019

Thiele, M.; Eckmann, S.; Huang, M.; Gampe, U.; Fischer, K.A.; Schlesinger, M.: Experimental and Numerical Investigation on the Influence of Thermally induced Stress Gradients on Fatigue Life of the Nickel-base Alloy MAR-M247. In: Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Volume 7A: Structures and Dynamics, Phoenix AZ/USA, June 17-21, 2019, doi.org/10.1115/GT2019-91540

Thiele, M.; Gampe, U.; Eckmann, S.; Schlesinger, M.; Huang, M.; Klenk, A., Fischer, K.A.: Impact of thermally induced stress gradients on fatigue lifetime of nickel-base alloy MAR-M247. In: Proceedings of the 45th MPA-Seminar, 01.-02. October 2019, University of Stuttgart, Germany

Tóth, M.; Hofmann, J.: Programme loading fatigue tests on cast-in headed studs. In: Otto-Graf-Journal, 18 (2019), pp. 345-356

Udoh, A.; Speicher, M.; Klenk, A.: Creep and Failure Behavior of Welded Joints Made of Alloy 617B. In: Proceedings of EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, October 21 – 24, 2019, Nagasaki, Japan, pp. 1123-1131

Vita, N.; Sharma, A.; Hofmann, J.: Local strengthening of anchorages with post-installed (supplementary) reinforcement. In: 7th International Conference on Euro Asia Civil Engineering Forum - IOP Conference Series: Materials Science and Engineering 615 (2019)

Vita, N.; Sharma, A.; Hofmann, J.: Strengthening of anchorages with post-installed supplementary reinforcement under shear loading. In: Otto-Graf-Journal, 18 (2019), pp. 357-368

Weber, M.; Sharma, A.; Hofmann, J.: Monotonic tests on masonry elements with different angles of inclination of the bed joints under uniaxial compression. In: International Journal of Masonry Research and Innovation 4 (2019), Nr. 3, pp. 243-264

Werz, M.: Development of a new material model for the continuum mechanical simulation of the friction stir welding process. 12th International Symposium on Friction Stir Welding, June 26-28, 2019, Chicoutimi, Quebec, Canada

Werz, M.: A new heat treatment sequence for friction stir welded hybrid tailor welded blanks. 12th International Symposium on Friction Stir Welding, June 26-28, 2019, Chicoutimi, Quebec, Canada

Woellmann, L.; Mueller, F.; Kontermann, C.; Oechsner, M.; Speicher, M.: Einfluss der elastischen Anisotropie auf das Kriechrissverhalten grobkörniger Nickelbasislegierungen, 42. Vortragsveranstaltung der Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe am 29. November 2019 in Düsseldorf, S. 75-86

 

Aicher, S.; Ahmad, Z.; Hirsch, M.: Bondline shear strength and wood failure of European and tropical hardwood glulams. In: European Journal of Wood and Wood Products 76 (2018), S. 1205-1222

Aicher, S.; Tapia, C.: Novel internally LVL-reinforced glued laminated timber beams wit large holes. In: Construction and Building Materials 169 (2018), pp. 662-677

Bokor, B.; Sharma, A.; Hofmann, J.: Experimental investigations on tension loaded anchor groups of arbitrary configurations. In: Foster, S.; Gilbert, R.I.; Mendis, P.; Al-Mahaidi, R.; Millar, D. (Eds.): Better, smarter, stronger: Proceedings for the International Federation for Structural Concrete 5th International fib Congress, Melbourne, Australia, 7-11 October 2018

Bosnjak, J.; Sharma, A.; Grauf, K.: Temperature-dependent behavior of fiber reinforced concrete. In: Ludwig, H.-M. (Hrsg.): IBAUSIL 20. Intern. Baustofftagung, 12.-14. September 2018 F.A. Finger-Institut für Baustoffkunde Weimar. Weimar: Bauhaus-Universität, 2018, S. 1-1185-1-1192

Bosnjak, J.; Sharma, A.; Meskovic, A.; Stipetic, M.: Experimental evaluation on the performance of masonry at elevated temperatures. In: Milani, G.; Talierci, A.; Garrity, S. (Eds.): 10th IMC, International Masonry Conference, Milan, Italy, July 9-11, 2018. Stoke-on-Trent: International Masonry Society, 2018

Bosnjak, J.; Sharma, A.; Öttl, C.: Modified beam-end-test setup to study the bond behavior of reinforcement in concrete after fire. In: Materials and Structures 51 (2018), Nr. 1

Fehringer, F.; Schuler, X.; Seidenfuß, M.: Development of a damage mechanics based kimit strain concept using an enhanced Rousselier model. In: Procedia Structural Integrity 13 (2018), pp. 932-938

Fuller, A.; Stegmaier, M.; Schulz, N.; Menke, M.; Schellhorn, H.; Knödler, F.; Maier, J.; Scheffknecht, G.: Use of wood dust fly ash from an industrial pulverized fuel facility for rendering. In. Construction and Building Materials 189 (2018), pp. 825-848

Garrecht, H.: Bauphysikalische und raumklimatische Problemstellungen in der Baudenkmalpflege: von der Ursache bis zur Lösung. In: Denkmalpflege als kulturelle Praxis. zwischen Anspruch und Wirklichkeit. Dokumentation VDL-Jahrestagung, Oldenburg 2017. Hameln: Niemeyer, 2018. (Arbeitshefte zur Denkmalpflege in Niedersachsen; 48), S. 106-113

Garrecht, H.: Verwertung in Betonbauteilen - Verbrennungsaschen. In: Betonwerk + Fertigteiltechnik 84 (2018), Nr. 2, S. 102-103

Garrecht, H.; Baumert, C.; Wieland, M.: Erfordernis einer gleichförmigen Rheologie von Betonen am Beispiel der Herstellung von Betonfahrbahnen. In: Viet Tue, N.; Krüger, M.; Freytag, B.; Baldermann, C.; Schulter, D. (Eds.): 4. Grazer Betonkolloquium 20. / 21. September 2018, Beton Graz ‚18. Graz: Verlag der Technischen Universität Graz, 2018, S. 127-138

Garrecht, H.; Schneider, J.; Blatt, C.: ETA-Fabrik - Energieeffizienz durch intelligente Vernetzung von Gebäude und Maschinen. In: Pahn, M.; Thiele, C.; Glock, O. (Hrsg.): Vielfalt im Massivbau: Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell. Berlin: Ernst, 2018, S. 322-342

Garrelts, E.; Fabis, D.; Roth, D.; Werz, M.; Binz, H.; Weihe, S.: Deficits in the Selection of Joining Processes for Car Body Design. In: Proceedings of the DESIGN 2018 - 15th International Conference, May 21-24, 2018, Dubrovnik, Croatia, pp. 1115-1126

Gauder, P.; Schuler, X.; Seidenfuss, M.: Expeirmental and numerical investigations on the failure behavior of pressurized components containing crack fields. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY: ASME, 2018

Gerber, S.; Ellermeier, J.: Kalibrierung in der Werkstofftechnik als Mittel zur Qualitätssicherung; Calibration in the field of materials engineering as instrument of quality assurance. Material-Wissenschaft und Werkstofftechnik 49 (2018), S. 5-11

Gross, J.; Buhl, P.; Weber, U.; Schuler, X.; Krack, M..: Effect of creep on the nonlinear vibration characteristics of blades with interlocked shrouds. In: International Journal of Nonlinear Mechanics 99 (2018), pp. 240-246

Hankele, M., Werz, M., Weihe, S.: Quantitative Untersuchung von Einflussfaktoren auf die statischen und zyklischen Festigkeits­eigenschaften von additiv gefertigtem AlSi10Mg. In: DGM-Fachtagung „Werkstoffe und additive Fertigung“, 25. – 26.04.2018, Potsdam

Hankele, M., Werz, M., Weihe, S.: Untersuchung der Festigkeitseigenschaften von additiv gefertigtem AlSi10Mg. DVS Congress 2018, 17. – 18.09.2018, Friedrichshafen

Hankele, M., Werz, M., Weihe, S.: Untersuchung der Porengrößenverteilung von additiv gefertigtem AlSi10Mg. DVM-Arbeitskreis „Additiv gefertigte Bauteile und Strukturen“, 3. Tagung, 07. und 08.11.2018, Berlin

Heckmann, K.; Sievers, J.; Schopf, T.; Schuler, X.; Acosta, R. de; Starke, P.; Boller, C.; Jamrozy, M.; Knyazeva, M.; Walther, F.: Strainlife: efficient fatigue life data generation for an enhanced ageing assessment of metallic components. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY: ASME, 2018

Hezel, J: Stuttgarter Holzbrücke – Erkenntnisse nach 2 Jahren Standzeit. In: 5. Internationale Holzbrückentage (IHB 2018). Holzbrückenbau in der Offensive, 17.4.-18.4.2018, Filderstadt/ Stuttgart

Hofmann, J.: Befestigung. In: Kalksandstein: Planungshandbuch; Planung, Konstruktion, Ausführung. Düsseldorf: Verlag Bau und Technik, 2018, S. 135-149

Hofmann, J.: Erdbebensichere Befestigungen. In: ql2/8 12 Würth Magazin für Ingenieure, Architekten und Planer (2018), Nr. 17, S. 10-18

Huang, M.; Klenk, A.; Kontermann, C.; Oechsner, M.: Einfluss der Mehrachsigkeit auf Kerbstützwirkung unter Kriechermüdungsbeanspruchung. 41. FVWHT-Vortragsveranstaltung 2018. Düsseldorf

Jüngert, A.; Dugan, S.; Homann, T.; Mitzscherling, S.; Prager, J.; Pudovikov, S.; Schwender, T.: Advanced ultrasonic techniques for nondestructive testing of austenitic and dissimilar welds in nuclear facilities. In: AIP Conference Proceedings 1949 (2018), ID 110002

Jüngert, A.; Friedrich, M.; Huang, M.; Klenk, A.; Weihe, S.: Monitoring of CMC-jacketed pipes for high-temperature applications. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY : ASME, 2018

Jüngert, A.; Swacek, C.; Gauder, P.; Schuler, X.: Ultraschalluntersuchungen an Rissfeldern in großen Schmiedekomponenten. In: DGZfP-Jahrestagung 2018, 7.5.-9.5.2018, Leipzig

Jüngert, A.; Große, C.: Anwendungen der lokalen akustischen Resonanzspektroskopie (LARS) an Rotorblättern von Windenergieanlagen. In: Fortschritte der Akustik – DAGA 2018, 44. Jahrestagung für Akustik, 19.-22.3.2018, München

Käß, M., Werz, M., Weihe, S.: Parametrische Untersuchung der Diskretisierung für die numerische Simulation von Temperaturfeldern, Eigenspannungen und Verzügen beim selektiven Laserschmelzen,
DGM-Fachtagung „Werkstoffe und additive Fertigung“, 25. – 26.04.2018, Potsdam.

Käß, M., Werz, M., Weihe, S.: Finite Element Simulation of Temperature Fields and Residual Stresses in Selective Laser Melting. In: Proceedings of the 12th International Seminar “Numerical Analysis of Weldability”, 23.–26.09.2018, Graz, Austria

Käß, M. Werz, M., Weihe, S.: Numerische Untersuchung von Einflüssen der Scanstrategie auf Eigenspannungen und Verzug beim selektiven Laserstrahlschmelzen. DVM-Arbeitskreis „Additiv gefertigte Bauteile und Strukturen“, 3. Tagung, 07. und 08.11.2018, Berlin

Kerkhof, K., Henkel, F.-O.: Großmaßstäbliche Erdbebenversuche zu den Wechselwirkungen Gebäude – Komponente. 6. VDI Fachtagung Baudynamik, 17.-18.04.2018, Würzburg

Kilian, R.; Holl, K.; Hahn, O.; Garrecht, H.: Präventive Konservierung – ein neues Referat der WTA In: Bausubstanz (2018), Nr. 6, S. 46-49

Kuhlmann, U.; Hofmann, J.; Ruopp, J.: Anschlüsse zwischen Stahl und Beton. In: Stahlbau Kalender 2018. Berlin : Ernst & Sohn, 2018, S. 743-804

Kuczynska, M.; N.Schafet, N.; U.Becker, U.; Metasch, R.; Roellig, M.; Kabakchievc, A.; Weihe, S.: Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load. In: Microelectronics Reliability 91 (2018), pp. 67-85

Lakhani, H.; Hofmann, J.: Advance heat transfer analysis and capacity curves accounting for the effect of spalling. In: 10th International Conference on Structures in Fire, SiF'18. Ulster University, Belfast, United Kingdom 6th to 8th of June, 2018, pp. 439-446

Lakhani, H.; Hofmann, J.: On the pull-out capacity of post-installed bonded anchors and rebars during the fire. In: 10th International Conference on Structures in Fire, SiF'18. Ulster University, Belfast, United Kingdom 6th to 8th of June, 2018, pp. 165-170

Lakhani, H.; Sharma, A.; Hofmann, J.: A coupled thermo-mechanical inelastic analysis approach for reinforced concrete flexural members during fire. In: Structural Concrete 19 (2018), pp. 1210-1224

Lehmann, F.; Schreiner, M.; Reinhardt, H.-W.: Instrumentierte Bauwerksüberwachung im Kontext historischer Bauten. In: Bautechnik 95 (2018), Nr. 1, S. 1-5

Mayer, U.; Mutz, A.; Nicak, T.: Compact crack arrest tests for the validation of a finite element material model of the reactor pressure steel of the nuclear power plant. In: PVP Pressure Vessels and Piping Conference, Prague, Czech Republic, July 15-20, 2018. New York NY: ASME, 2018

Metzger, K.; Friedrich, M.; Huang, M.; Klenk, A.: Grosskraftwerk Mannheim setzt auf innovative Werkstoffe; In VDI-Technikforum (Mitgliedermagazin VDI Nordbaden-Pfalz und VDE Kurpfalz) 1/2018, pp. 8-10

Mishaxhiu, N.; Sharma, A.; Hofmann, J.: Numerical investigations on the behaviour of circular anchor groups. In: Foster, S.; Gilbert, R.I.; Mendis, P.; Al-Mahaidi, R.; Millar, D. (Eds.): Better, smarter, stronger: Proceedings for the International Federation for Structural Concrete 5th International fib Congress, Melbourne, Australia, 7-11 October 2018

Nürnberger, U.; Rauscher, T.: Die ultimative Lösung für chloridgefährdete Spannbetonkonstruktionen - Nichtrostende Spannstähle. In: Betonwerk + Fertigteiltechnik 84 (2018), Nr. 2, S. 54-55

Panzer, F.; Werz. M.; Weihe, S.: Experimental investigation of the friction stir welding dynamics of 6000 series aluminium alloys. In: Production Engineering (2018), No. 5

Reinhardt, H.W.; Müller, B.; Mielich, O.; Markert, M.; Wasel, D.; Ulsamer, P.: Einfluss von Superabsorbern auf das Druckkriechen von Beton. In: Ludwig, H.-M. (Hrsg.): IBAUSIL 20. Intern. Baustofftagung, 12.-14. September 2018 F.A. Finger-Institut für Baustoffkunde Weimar. Weimar: Bauhaus-Universität, 2018, S. 1-1041--1-1047

Reinhardt, H.-W.; Özkan, H.; Mielich, O.: Last- und zeitabhängige Verformungen von AKR-geschädigten Betonen aus langsam reagierenden Gesteinskörnungen. In: Beton 68 (2018), Nr. 12, S. 468-475

Reinhardt, H.W.; Özkan, H.; Mielich, O.: Changes in mechanical properties of concrete due to ASR. In: Hormigón y Acero 69 (2018), pp. 15-19

Rückle, D.; Kaesche, S.; Garrecht, H.: Das Oxidationsverhalten von Stählen in Salzschmelzen bei 560 °Grad. In: Galvanotechnik (2018), Nr. 6 und 7, S. 1218-1221, 1414-1418

Sakiyama, N.R.M.; Frick, J.; Garrecht, H.: Cultural heritage compatible insulation plaster: analysis and assessment by hygrothermal simulations. In: Broström, T.; Nilsen, L.; Carlsten, S. (Eds.): The 3rd International Conference on Energy Efficiency in Historic Buildings: Conference Report; Visby Sweden, September 26 - 27, 2018. Visby: University of Uppsala, Gotland Campus, pp. 89-98

San Marchi, C.; Yamabe, J.; Schwarz, M.; Matsunaga, H.; Zickler, S.; Matsuoka, S.; Kobayashi, H.: Global harmonization of fatigue life testing in gaseous hydrogen. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY: ASME, 2018

Schippl, V.; Brück, S.; Christ, H.-J.; Fritzen, C.-P.; Schwarz, M., Weihe, S.: Modeling of hydrogen effects on short crack propagation in a metastable austenitic stainless steel (X2CrNi19-11). In: MATEC Web of Conferences 165 (2018)

Schuler, X.; Schopf, T.; Beck, T.; Smaga, M.; Daniel, T.; Rudolph. J.; Buchholz, B.: Investigation on the fatigue behavior of austenitic stainless steels and their welds for reactor internals under combined low cycle (LCF), high cycle (HCF) and very high cycle (VHCF) operational loading conditions. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY: ASME, 2018

Sharma, A.; Bosnjak, J.; Aravindhan, C.P.: Thermal degradation of bond between steel and steel fiber reinforced concrete. In: Ludwig, H.-M. (Hrsg.): IBAUSIL 20. Intern. Baustofftagung, 12.-14. September 2018 F.A. Finger-Institut für Baustoffkunde Weimar. Weimar: Bauhaus-Universität, 2018, S.1-1193-1-1203

Speicher, M.; Kauffmann, F.; Shim, J.-H.; Chandran, M.: Microstructure evolution in alloy 617 B after a long-term creep and thermal aging at 700 °C. In: Materials Science and Engineering: A 711 (2018), pp. 165-174

Swacek, C.; Schuler, X.; Seidenfuss, M.: Numerical investigations on the interaction of cracks in quasi-laminar crack fields. In: Proceedings of the ASME Pressure Vessels and Piping Conference -2018- : presented at the ASME 2018 Pressure Vessels and Piping Conference, July 15-20, 2018, Prague, Czech Republic. New York NY: ASME, 2018

Thiele, M.; Eckmann, S.; Huang, M.; Fischer, K.A.: Einfluss thermisch induzierter Spannungsgradienten auf die Ermüdungslebensdauer. Zwischenbericht zum FVV-Vorhaben Nr. 1218. FVV Frühjahrstagung Heft R583, 2018, pp. 65-96

Thiele, M., Gampe, U., Fischer, K.A., Eckmann, S., Huang, M.: An Innovative Test Facility for Investigation of the Influence of Thermally Induced Stress Gradients on Fatigue Life. 12th International Fatigue Congress 2018. Portiers, France

Tian, K.; Ozbolt, J.; Periskic, G.; Hofmann, J.: Concrete edge failure of single headed stud anchors exposed to fire and loaded in shear: experimental and numerical study. In: Fire Safety Journal 100 (2018), pp. 32-44

Tian, K.; Ozbolt, J.; Sharma, A.; Hofmann, J.: Experimental study on concrete edge failure of single headed stud anchors after fire exposure. In: Fire Safety Journal 96 (2018), pp. 176-188

Toth, M.; Hofmann, J.: Experimentelle Untersuchungen zur Stoßbelastung von Verankerungen in Beton. In: Pahn, M.; Thiele, C.; Glock, O. (Hrsg.): Vielfalt im Massivbau: Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell. Berlin: Ernst, 2018, S. 188-200

Udoh, A.; Klenk, A.; Bockelmann, M.; Heinemann, J.: Untersuchung zum langzeitigen Festigkeits- und Verformungsverhalten von längsnahtgeschweißten Rohren aus der Nickelbasislegierung Alloy 617B. 46. Sondertagung “Schweißen im Anlagen- und Behälterbau”, 20. bis 23. Februar 2018, München

Udoh, A.; Quatier, J.; Klenk, A.: Charakterisierung betriebsbeanspruchter Kraftwerkskomponenten und Ermittlung der Restlebensdauer. 44. VDI-Vortragsveranstaltung „Schadensanalyse in der Energietechnik. 10. und 11. Oktober 2018, Würzburg

Weihe, S.; Klenk, A.; Werz, M.; Zickler, S.: Einsatzgrenzen erweitern – der Schlüssel zum Erfolg. In: WAW Jahresmagazin Werkstofftechnik 2018, S. 140-146

Weihe, S.; Silber, F.; Wackenhut, G.; Stumpfrock, L.: Assessment of Fatigue Loaded Components in Hydro Power Plants. VGB Expert Event „Inspection, maintenance and refurbishment of hydropower plants“, 30th November 2018, Salzburg, Austria

Zanter, F.; Silber, F. E.; Wackenhut, G.: Condition monitoring and assessment of machine parts in the pumped-storage power plant Vianden. 20th International Conference on Hydropower Plants “Celebrating 40 Years of Industry-Academic Engagement”, 14.-16.11.2018, Vianden, Belgium

Zöldföldi, J.; Viefhaus, T.; Ullmann, D.: Möglichkeiten und Grenzen mobiler schwingungsspektroskopischer Methoden in der Schadensanalytik im Bauwerk. In: Institut für Steinkonservierung e. V. (Hrsg.): IFS-Bericht Nr. 55 – 2018, Berichtsband zur IFS-Tagung am 6. Dezember 2018 im Landesmuseum Mainz

Zöldföldi, J.; Paz, B.; Jakobs, D.: Anwendung zerstörungsfreier mobile spektroskopischer Prüfverfahren (Raman und NIR) zur Identifizierung bauschädlicher Salze. Natursteintagung 2018, 16.-17.3.2018, Stuttgart

Zöldföldi, J.; Paz, B.; Jakobs, D.: Zerstörungsfreie und minimal invasive Bestimmung von Pigmentumwandlungen an den Wandmalereien der St. Georg Kirche auf der Insel Reichenau. Archäometrie und Denkmalpflege 2018, 20.-23.03.2018, Hamburg

Weitere Publikationen

Böhm, Constantin: Entwicklung einer Gefügekarte für Laserschweißnähte aus Aluminiumlegierungen, 2022
Link zum Volltext

Schwarz, Martina: Influence of hydrogen gas environment on fatigue short crack growth in austenitic and martensitic stainless steel, 2022
Link zum Volltext

Tapia Camú, Cristóbal: Variation of mechanical properties in oak boards and its effect on glued laminated timber : application to a stochastic finite element glulam strength model, 2022 (MPA + IWB)
Link zum Volltext

Sakiyama, Felipe Isamu Harger: Real-size structural health monitoring of a prestressed concrete bridge based on long-gauge fiber Bragg grating sensors, 2021
Link zum Volltext

Sakiyama, Nayara Rodrigues Marques: Performance-oriented design and assesment of naturally ventilated buildings, 2021
Link zum Volltext

Arnaudov, Nikolai: Micromechanical simulation of fatigue crack initiation under hydrogen influence, 2021 (MPA + IMWF)
Link zum Volltext

Werz, Martin: Experimentelle und numerische Untersuchungen des Rührreibschweißens von Aluminium- und Aluminium-Stahl-Verbindungen zur Verbesserung der mechanischen Eigenschaften, 2020 (MPA + IMWF)
Link zum Volltext

Benk, Zeynel: Ermüdungsschädigung und Kurzrissausbreitung in nichtrostendem Stahl unter korrosivem Kraftstoffeinfluss, 2020 (MPA + IMWF)
Link zum Volltext

Kammerer, Matthias Carsten: Modellierung des Ermüdungsverhaltens von Mischschweißnähten unter Mediumsbedingungen bei multiaxialer thermo-mechanischer Beanspruchung, 2020 (MPA + IMWF)
Link zum Volltext

Schleyer, Johannes Martin: Lebensdauervorhersage von Mischschweißverbindungen für Hochtemperaturbeanspruchung, 2020  (MPA + IMWF)
Link zum Volltext

Leibing, Benjamin: Untersuchung des Relaxationsverhaltens einer warmgehenden Rohrflanschverbindung unter anisothermen Beanspruchungen, 2019 (MPA + IMWF)

Métais, Benjamin: Development of a viscoplastic-damage model for creep-fatigue FE-calculations of the lead-free SnAgCu solder alloy for automotive applications, 2019 (MPA + IMWF)
Link zum Volltext

Rückle, Dagmar: Das Oxidationsverhalten und die elektrochemische Charakterisierung von Stählen in Nitratschmelzen bei hohen Temperaturen, 2019 (MPA + IWB)
Link zum Volltext

Dwenger, Fabian: Einfluss des Tragverhaltens von Dübelbefestigungen auf die Bauwerk-Komponenten-Wechselwirkungen bei Erdbebenbeanspruchung, 2019 (MPA + IWB)
Link zum Volltext

Lehmann, Frank: Instrumented monitoring of moisture and salt by electrical impedance measurements, 2018 (MPA + IWB)
Link zum Volltext

Özkan, Hasan: Kriechen von Beton unter Einfluss einer Alkali-Kieselsäure-Reaktion, 2018 (MPA + IWB)
Link zum Volltext

Moritz, Stephanie: Optimierte Auslegung von Flanschverbindungen mit GFK-Flanschen unterschiedlicher konstruktiver Gestaltung unter Berücksichtigung des spezifischen Werkstoffverhaltens, 2018
Link zum Volltext:

Hoßfeld, Max: Experimentelle, analytische und numerische Untersuchungen des Rührreibschweißprozesses, 2016
Link zum Volltext

Offermanns, Stefan: Verhalten dünnwandiger austenitischer Rohre bei Wasserstoff-Sauerstoff-Detonation, 2016
Link zum Volltext

Schaaf, Manfred: Strategie zur Verminderung von Emissionen aus Flanschverbindungen, 2015 (MPA + IMWF)
Link zum Volltext

Hüggenberg, Daniel: Lebensdauerbewertung dickwandiger Bauteile aus Nickelbasislegierungen unter betriebsnahen Beanspruchungen, 2015
Link zum Volltext

Rettenmeier, Philipp: Bewertung von geschweißten Kranbahnen unter mehrachsiger Ermüdungsbeanspruchung durch Radlasten, 2015
Link zum Volltext

Hobt, Alexander:  Bewertung von Fehlstellen im Kriechbereich, 2015 (MPA + IMWF)
Link zum Volltext

Utz Stefan Tobias: Thermische Ermüdung in Kraftwerkskomponenten : experimentelle und numerische Untersuchungen, 2015 (MPA + IMWF)
Link zum Volltext

Krojer, Stefan: Werkstoffuntersuchungen an Mischschweißverbindungen für den Einsatz in Turbinenwellen des 700 °C-Kraftwerks, 2015 (MPA + IMWF)
Link zum Volltext

Huang, Min: Numerische und experimentelle Untersuchungen von Keramik-Metall-Compoundrohren für die Hochtemperaturanwendung in Kraftwerksrohrleitungen, 2015
Link zum Volltext

Kurz, Hariolf: Auslegung und Optimierung von Flanschverbindungen mit SMC-Losflanschen und PTFE-Dichtungen, 2014
Link zum Volltext

Kohlenbecker, Michael: Untersuchung der Eigenspannungsstabilität von autofrettierten Aluminiumbauteilen unter zyklischer Beanspruchung und erhöhter Temperatur, 2014
Link zum Volltext

Vajen, Henning: Untersuchung des Einflusses praxisnaher Erprobungsbedingungen auf die Schwingfestigkeit von Bauteilen des Common-Rail-Dieseleinspritzsystems, 2014
Link zum Volltext

Wang, Yu: Experimental and numerical evaluations of viscoplastic material behaviour and multiaxial ratchetting for austenitic and ferritic materials, 2014 (MPA + IMWF)
Link zum Volltext:

Kleih, Leonard Georg: Theoretische und experimentelle Analyse des Bauteilverhaltens rührreibgeschweißter Überlappverbindungen, 2013 (MPA + IMWF)
Link zum Volltext

Frolova, Olga: Fortgeschrittene Methoden zur Bewertung des schmelzenspezifischen Zeitstandbruchverhaltens von Werkstoffen des Kraftwerkbaus, 2012
Link zum Volltext

Lückemeyer, Nils: Strukturmechanische Auslegungskonzepte für Großkomponenten einer 700°C Dampfturbine, 2012 (IMWF)
Link zum Volltext

Fesich, Thomas M.: Festigkeitsnachweis und Lebensdauerberechnung bei komplex mehrachsiger Schwingbeanspruchung, 2012 (MPA + IMWF)
Link zum Volltext

Mutz, Alexander: Strukturmechanische Bewertung von Rohrleitungskomponenten und -systemen in Energiewandlungsanlagen unter Berücksichtigung der realen Werkstoffcharakteristik, 2011
Link zum Volltext

Schütt, Thorsten: Experimentelle und numerische Untersuchungen zur fertigungsbedingten Entstehung von Fehlern in Mischschweißverbindungen, 2011
Link zum Volltext

Krätschmer, Daniel Markus: Bewertung mikrostruktureller Werkstoffschädigung bei Schwingbeanspruchung mit stochastischen Methoden, 2011 (MPA + IMWF)
Link zum Volltext

Reicherter, Bernd: Untersuchung der werkstoffmechanischen Vorgänge zur verbesserten Lebensdauervorhersage im Low Cycle Fatigue Bereich, 2011 (MPA + IMWF)
Link zum Volltext

Büttner, Mathias: Versagensverhalten rissbehafteter Mischschweißnähte - theoretische und experimentelle Untersuchungen, 2011
Link zum Volltext

Huß, Andreas: Mischungsentwurf und Fließeigenschaften von Selbstverdichtendem Beton (SVB) vom Mehlkorntyp unter Berücksichtigung der granulometrischen Eigenschaften der Gesteinskörnung, 2011. (DAfStb-Heft; 598) (MPA + IWB)
Link zum Volltext

Mielich, Oliver: Beitrag zu den Schädigungsmechanismen in Betonen mit langsam reagierender alkaliempfindlicher Gesteinskörnung, 2010. (DAfStb-Heft; 583) (MPA + IWB)

Jüngert, Anne: Untersuchung von GFK-Bauteilen mit akustischen Verfahren am Beispiel der Rotorblätter von Windenergieanlagen, 2010 (MPA + IWB)
Link zum Volltext

M. Speicher; C. Kohler; L. Wöllmann; F. Müller, C. Kontermann: Simulation des Rissverhaltens von grobkörnigen Nickelgusslegierungen bei hohen Temperaturen. FVV Nr. 1251, Abschlussbericht, Fördernummer IGF 19226 N, Heft R597 (2021)   Download pdf-Datei

  • Hofmann, J.; Plizzari, G. (Eds.): Bond in Concrete, Bond, Anchorage, Detailing: 5th International Conference, Stuttgart, Germany, 25th - 27th July 2022; Proceedings. Stuttgart : Institute of Materials Construction; Materials Testing Institute, 2022. PDF-File
  • Materialprüfungsanstalt Universität Stuttgart (Hrsg.): 125 Jahre Materialprüfungsanstalt MPA Universität Stuttgart 1884 - 2009 :Festschrift zur Festveranstaltung am 8. Oktober 2009 in Stuttgart. Stuttgart : MPA, 2009.
    Zum Volltext

Flyer der MPA Universität Stuttgart

Abteilungs - Flyer Anlagenbewertung und Betriebsstrategie

Abteilungs - Flyer Baukonstruktionen und Bauteilprüfung

Abteilungs - Flyer Bauteilbewertung und Zuverlässigkeit

Abteilungs - Flyer Bauwerkserhaltung

Abteilungs - Flyer Betriebsverhalten unter Medieneinfluss

    Referats - Flyer Schwing und Hochdruckprüfung

Abteilungs - Flyer Brandschutz

Abteilungs - Flyer F&E-Satelliten Bau

Abteilungs - Flyer Fügetechnik und Additive Fertigung

    Referats - Flyer Additive Fertigung

    Referats - Flyer Fügeverfahren

Abteilungs - Flyer Holzkonstruktionen

Abteilungs - Flyer Kalibrierung, Lager, Passive Sicherheit

Abteilungs - Flyer Mineralische Baustoffe

Abteilungs - Flyer ZfP und Materialcharakterisierung

    Referats - Flyer Elektronenmikroskopie und Metallographie

    Referats - Flyer Forschungsverbund AMICA

 

Kontakt

Dieses Bild zeigt Monika Werner

Monika Werner

Dipl.-Bibl.

Bibliothekarin

Zum Seitenanfang